Maytag W10366206A Troubleshooting, Changing the Light Bulb, Refrigerator Operation

Page 16

3.Clean the exterior surfaces.

Painted metal: Wash painted metal exteriors with a clean, soft cloth or sponge and a mild detergent in warm water. Rinse surfaces with clean, warm water and dry immediately to avoid water spots.

Stainless steel: Wash stainless steel surfaces with a clean, soft cloth or sponge and a mild detergent in warm water. Rinse surfaces with clean, warm water and dry immediately to avoid water spots.

NOTE: When cleaning stainless steel, always wipe in the direction of the grain to avoid cross-grain scratching.

4.There is no need for routine condenser cleaning in normal home operating environments. If the environment is particularly greasy or dusty, or there is significant pet traffic in the home, the condenser should be cleaned every 2 to

3 months to ensure maximum efficiency. If you need to clean the condenser:

■Remove the base grille.

■Use a vacuum cleaner with a soft brush to clean the grille, the open areas behind the grille and the front surface area of the condenser.

■Replace the base grille when finished.

5.Plug in refrigerator or reconnect power.

Changing the Light Bulb

NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace the bulb with an appliance bulb of the same size, shape, and wattage (no greater than 40 watts).

1.Unplug the refrigerator or disconnect power.

2.Remove the light shield (on some models).

■Top of the refrigerator compartment - Slide the light shield toward the back of the compartment to release it from the light assembly.

3.Replace the burned-out bulb(s) with an appliance bulb(s) no greater than 40 watts.

4.Replace the light shield.

5.Plug in refrigerator or reconnect power.

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

In the U.S.A., www.maytag.com In Canada, www.maytag.ca

Refrigerator Operation

The refrigerator will not operate

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

■Power cord unplugged? Plug into a grounded 3 prong outlet.

■Is outlet working? Plug in a lamp to see if the outlet is working.

■Household fuse blown or circuit breaker tripped? Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

■Are controls on? Make sure the refrigerator controls are on. See “Using the Control(s).”

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

NOTE: Adjusting the temperature controls to coldest setting will not cool either compartment more quickly.

The motor seems to run too much

Your new refrigerator may run longer than your old one due to its high-efficiency compressor and fans. The unit may run even longer if the room is warm, a large food load is added, doors are opened often, or if the doors have been left open.

The refrigerator seems noisy

Refrigerator noise has been reduced over the years. Due to this reduction, you may hear intermittent noises from your new refrigerator that you did not notice from your old model. Below are listed some normal sounds with explanations.

■Buzzing - heard when the water valve opens to fill the ice maker

■Pulsating - fans/compressor adjusting to optimize performance

■Hissing/Rattling - flow of refrigerant, movement of water lines, or from items placed on top of the refrigerator

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Refrigerator Safety Refrigerator User InstructionsInstallation Instructions Unpack the RefrigeratorBefore You Throw Away Your Old Refrigerator or Freezer Remove the PackagingClean Before Using Location RequirementsElectrical Requirements Recommended Grounding MethodWater Supply Requirements Connect the Water SupplyWater Pressure Reverse Osmosis Water SupplyConnect to Refrigerator Complete the InstallationStyle Refrigerator Doors and Drawer Remove and Replace Refrigerator Door Handles Standard DoorFrench Doors Remove Door and Hinges Standard DoorReverse Door Standard Door optional Replace Door and Hinges Standard DoorCabinet Refrigerator doorRemove and Replace Freezer Drawer Remove and Replace Drawer HandleRemove Drawer Front Replace Drawer FrontDoor Removal Replacement Door Swing Reversal optional Standard DoorDrawer Front Removal Drawer Front Replacement Door Closing and Door Alignment Refrigerator USEOpening and Closing Doors Electronic Controls Using the ControlsDigital Controls To Adjust Set Point Temperatures Additional Digital Control Center Features Fast CoolDoor Alarm Reset FilterIce Maker Crisper Humidity ControlWater Dispenser Refrigerator Care CleaningWater Filtration System Changing the Light Bulb TroubleshootingRefrigerator Operation Temperature and Moisture Ice and WaterWater Filter Certifications Water dispenser will not operate properlyWater is leaking from the dispenser system Water from the dispenser is warmPerformance Data Sheets Application Guidelines/Water Supply ParametersModel UKF8001AXX-200 Capacity 200 Gallons 757 Liters Maytag Major Appliance Warranty Limited WarrantyItems Excluded from Warranty This limited warranty does not coverInstructions Dutilisation DU Réfrigérateur Sécurité DU RéfrigérateurInstructions D’INSTALLATION Déballage du réfrigérateurAvant de jeter votre vieux réfrigérateur ou congélateur Enlèvement des matériaux d’emballageMéthode recommandée de mise à la terre Exigences demplacementSpécifications électriques Raccordement de la canalisation deau Pression de leauAlimentation en eau par osmose inverse Raccordement à une canalisation d’eauAchever l’installation Raccordement au réfrigérateurPorte à deux battants Portes et tiroir du réfrigérateurDépose des portes et des charnières Porte standard Réinstallation Porte et charnières Porte standard CaissePorte du compartiment de réfrigération Porte du compartiment de congélationRetirer et réinstaller le tiroir du congélateur Dépose et réinstallation de la poignée du tiroirRéinstallation de la façade du tiroir Portes à deux battantsInversion du sens douverture de la porte facultatif Porte standardCharnières supérieures Portes à deux battantsFermeture et alignement de la porte Utilisation des commandes Commandes électroniquesUtilisation DU Réfrigérateur Ouverture et fermeture des portesCommandes numériques Ajustement des réglages de commandeAjustement des réglages de commande numérique Pour ajuster les points de réglage de températureTemp Alarm alarme de dépassement de température Door Alarm avertisseur de la porteReset Filter réinitialisation du filtre Préférences de lutilisateur avec la commande numériqueMachine à glaçons Distributeur d’eauMise en marche/arrêt de la machine à glaçons Taux de production des glaçonsSystème de filtration de leau Entretien DU RéfrigérateurNettoyage Dépannage Remplacement de l’ampoule d’éclairageFonctionnement du réfrigérateur Température et humidité Glaçons et eauLes glaçons sont creux ou petits Mauvais goût, odeur ou couleur grise des glaçonsLe distributeur deau ne fonctionne pas correctement ’eau coule du système de distributionFeuilles DE Données SUR LA Performance Système de filtration d’eau intérieurModèle UKF8001AXX-200 /Capacité 200 gallons 757 litres Garantie DE Gros Appareil Ménager Maytag Garantie LimitéeÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasPage Page Page Page W10366206A SP PN W10366207A

W10366206A specifications

The Maytag W10366206A is a highly regarded kitchen appliance, specifically designed as a replacement part for various Maytag appliances. This component showcases the brand's commitment to quality and durability, ensuring that it meets the demanding needs of everyday use in modern kitchens.

One of the standout features of the W10366206A is its robust construction. Made with high-quality materials, it is engineered to withstand the rigors of frequent operation, contributing to the longevity of the appliance it serves. This durability is a hallmark of Maytag, a brand known for its emphasis on reliability and performance.

The W10366206A is compatible with a range of Maytag models, which adds to its appeal. This versatility allows consumers to replace worn or damaged parts without the need to purchase an entirely new appliance. This not only saves money but also reduces waste, aligning with sustainable practices that many consumers value today.

In terms of technology, the W10366206A embodies innovative design. This part is designed with precision to ensure a seamless fit and effective operation within your kitchen appliance. Its design includes features that facilitate easy installation, making it a user-friendly option for those who might prefer to make repairs themselves.

Another important characteristic of the W10366206A is its efficiency. By ensuring that appliances operate at their optimal levels, this replacement part contributes to energy savings, which is increasingly important in today’s eco-conscious environment. With energy-efficient performance, consumers can expect to see reductions in utility bills while enjoying consistent service from their Maytag appliances.

Moreover, Maytag's commitment to customer satisfaction is evident in the extensive testing and quality control that the W10366206A undergoes before reaching consumers. This rigorous process ensures that every part meets high standards of performance, giving users peace of mind in their investment.

In conclusion, the Maytag W10366206A presents a combination of durability, compatibility, innovative technology, and efficiency that make it a valuable component in any kitchen setting. Whether you are looking to maintain your appliance’s performance or make a simple upgrade, this replacement part stands as a testament to Maytag’s reputation for excellence. Investing in the W10366206A is choosing reliability and quality that consumers can trust.
Top Page Image Contents