Fisher & Paykel CG902Q, CG602M, CG902M manual Trouble shooting, Problem Possible solutions

Problem

Possible solutions

My cooktop does not

Check it is plugged in and there is power to the wall socket.

light

The gas igniters may be dirty. These can be easily cleaned

with a toothbrush and methylated spirits.

The burner parts may not be located properly. Check the

assembly and make sure the burner cap is sitting flat.

Check the gas supply valve is turned on and the supply to

the house is working. Gas should be heard when you turn a

burner on.

My burner flames are

The burner parts may not be located properly. Check the

yellow/slow to start

assembly and make sure the burner cap is sitting flat.

If you use bottled gas this may indicate you are getting near

the end of the bottle.

Check that the burner parts are not blocked with water.

The gas pressure may not be at the correct level, check with

your service person/installer.

One of my burners

Check the burner parts are clean, dry and assembled correctly

has an uneven flame

and that the burner cap is sitting flat on the burner.

My cooktop goes out

Your cooktop has a safety feature called ‘flame failure’. When

when I let go of the

lighting a burner, it is necessary to hold down the knob for 5

knob

seconds until it is properly engaged. See page 4 for more on

flame failure.