Rounded corners
Repositioning the pan supports
The wok support goes in the centre over the wok burner. The other two pan supports are interchangeable but need to be rotated to match the rounded corners of the base insert.
Correct pan support orientation - Titan models
Re-assembling your wok burner (CG912TM Iridium models only)
Each part of your wok burner has locating pins to help you to assemble it correctly after cleaning. Incorrect assembly can cause dangerous irregular flames and ignition problems. Refer to this diagram for the correct order of assembly. Note: The brass parts of your wok burner will change colour with use. This is normal and will not affect performance.
Inner cap
Outer cap (small holes)
Trim ring
Side view
Rotate vent ring to align locator pin with hole in burner base.
Vent ring with locator pins (large holes)
Align and insert pin
6 | Titan models only (CG912 series) |
|