Fisher & Paykel installation instructions Clearances, CG603 Series CG903 Series CG913 Series

Clearances

a	d		b
			g
		e
			f
c

a 600 mm minimum from top of trivet to rangehood.

750 mm minimum from top of trivet to overhead exhaust fan. (Fisher & Paykel splashbacks are 750 mm high).

b 600 mm minimum from top of trivet to downward facing combustable surface. (450 mm minimum if protected by tiles or fire resistant materials).

	CG603 SERIES	CG903 SERIES	CG913 SERIES
c Clearance from side edge of	130 mm	120 mm	80 mm
product to any combustible surface
d Clearance from rear edge of	100 mm	90 mm	90 mm
product to any combustible surface
Clearance from rear edge of	10 mm	10 mm	10 mm
product to any non-combustible
surface
e Clearance below benchtop to any	60 mm	60 mm	81 mm
combustible surface
Clearance below benchtop to	45 mm	45 mm	81 mm
F&P DishDrawer® or F&P oven

fEnsure there is an earthed power outlet within 900 mm of the rear right-hand corner of the product. When used with a flexible hose, the connector on the wall should be between 800 mm to 850 mm above the floor and in the region outside the width of the appliance to a distance of 250 mm. This should be accessible with the appliance installed.

g When protecting a wall with non-combustible material it must be at least 150 mm high.

4