Fisher & Paykel CG363MLD manual Cleaning the on/off power button and the control dials

Care and cleaning

To clean the burner head

17US CA

1Lift out the burner head and clean with a cloth or scourer. The burner head gets much hotter than the pan support pins and for this reason it is not finished with an easy-clean coating. If cooking splatter and spills get burnt onto the burner head, scrub with a mildly abrasive cleaner and a soft cloth. Ceramic cooktop cleaner is suitable for this.

2Replace the clean burner head.

3Press the on/off power button to turn the CookSurface on.

4Lower the pan supports before using to check they have been reassembled correctly (see Fig. 4).

If spilled or burnt food has stuck the pan supports in the ‘down’ position, soften the spill with a damp, soapy, soft cloth and remove the food.

Cleaning the on/off power button and the control dials

Wipe these with a soft cloth and mild detergent. You can remove the control dials by pulling them up and out. When replacing the dials, make sure you orientate them correctly.

On/Off power button

Control dial

Fig.5 Remove the control dials by pulling them up and out