Fisher & Paykel DD602I Dishdrawer TOE Kick Information, Integrated TOE Kick Installation, DD22

Page 23

DISHDRAWER TOE KICK INFORMATION

STEP 7.1 INTEGRATED TOE KICK INSTALLATION

Upper Toe Kick

7.1.1

Remove Plastic Toe Kick from product.

Unscrew metal back panel.

7.1.2

Place customer supplied Upper Toe Kick face down on soft surface. Locate metal back panel on rear of Toe Kick (ensure the bottom of Toe Kick and panel are flush and centered).

7.1.3

Using screws provided, fix metal panel onto Toe Kick. Install Upper Toe Kick onto product.

Lower Toe Kick

SECTION 7

I

N

T

E

G

R

A

T

E

7.1.4

Place customer supplied Toe Kick face down on a soft surface and mark a vertical center line.

Measure out from center

929/32 (251.5mm) and 105/8 (269.5mm) in both directions and mark Toe Kick pin hole center lines.

Toe Kick

D

P

R

7.1.5

Trim the Toe Kick pin to length, at the nearest groove. The correct length is such that when the bottom of the pin is

3/64” (1mm) above the bottom of the toe kick, the top is within +/- 1/8” (3mm) of the Toe Kick top.

7.1.6

Cut Toe Kick Pin. Locate Toe Kick Pin screw holes over the vertical lines. Line up the cut base of the Toe Kick Pin

3/64” (1mm) above the bottom of the Toe Kick then mark out the screw holes.

7.1.7

Drill pilot holes to a depth of 1/4" (6mm). Fix Toe Kick Pins to Toe Kick with screws provided. Install Toe Kick to product.

7.1.8

Adjust the Upper Toe Kick as per Step 4.4 to achieve gap.

O

D

U

C

T

O

N

L

Y

Page DD_22

Page 22 Page 24
Image 23
Page 22 Page 24
Contents USA Table of Contents DD02 Product Specifications & Cavity DimensionsGeneral Information PreparationDD03 Grounding InstructionsPlumbing Water Supply DD04 Plumbing Drainage OptionsDD05 Product PartsAdditional Product Parts for Integrated DD06 Foot Slide Retainer InformationAssembling the Foot Slide Retainer DD07 Securing the Foot Slide RetainerDD08 Connecting the ServicesFitting the Dishdrawer DD09 DD10 Adjusting the FeetDD11 Securing the DishdrawerDD12 Prefinished TOE Kick InstallationSetting the Upper TOE Kick Height Trimming the Lower TOE KickDD13 Trimming the TOE Kick PinsDD14 Adjusting the Upper TOE KickDD15 Integrated Drawer Front & TOE Kick DimensionsInformation for Cabinet Maker for Integrated Dishdrawer DD16 DD17 Control Badge PositionDD18 Drawer Front Mounting Bracket Nut HolesDD19 Integrated Drawer Front InstallationDisassembling the Integrated Badge Assembling the Integrated BadgeDD20 DD21 Fitting the Drawer Front Panels to the DishdrawerDD22 Integrated TOE Kick InstallationDishdrawer TOE Kick Information DD23 Installation WET TestTroubleshooting Final Checks

DD602I, DD602 specifications

Fisher & Paykel, a renowned brand in the world of home appliances, has made a significant mark with its innovative and reliable dishwashing solutions. Among their popular offerings are the DD602 and DD602I models, which feature a blend of efficiency, design, and advanced technology.

The Fisher & Paykel DD602 is a stylish, under-bench dishwasher designed to blend seamlessly with modern kitchen aesthetics. Its sleek design features a polished stainless steel front that adds a touch of elegance, while the DD602I comes with a customizable front panel that allows homeowners to match it perfectly to their cabinetry, offering a more integrated look. This versatility makes both models a favorite for homeowners looking to maintain a cohesive kitchen design.

One of the standout features of the DD602 and DD602I is their Smart Drive technology. This innovative system was developed to ensure superior washing performance, utilizing fewer moving parts, which enhances reliability and longevity. The intelligent sensing capabilities of the Smart Drive system allow the dishwasher to automatically adjust water usage and cycle time according to the load, optimizing efficiency and reducing energy consumption.

Both the DD602 and DD602I models boast a variety of wash programs tailored to different cleaning needs, including delicate, heavy, and fast cycles. Their spacious interior can comfortably accommodate up to 14 place settings, making them perfect for families or entertaining guests. The adjustable racks and foldable tines provide flexibility in loading, allowing for the safe washing of larger items and stemware.

In terms of quiet operation, these dishwashers stand out with a low decibel rating, ensuring a peaceful home environment while in use. The built-in safety features, such as a triple filter system, prevent food particles from recontaminating the dishes, while a child lock function adds peace of mind for families.

Fisher & Paykel's commitment to sustainability is also reflected in these models. Both the DD602 and DD602I are designed to minimize water and energy consumption, making them a responsible choice for eco-conscious consumers.

Overall, the Fisher & Paykel DD602 and DD602I dishwashers combine modern design and cutting-edge technology to deliver exceptional washing performance, reliability, and efficiency, making them an excellent choice for any kitchen.
Top Page Image Contents