Fisher & Paykel DD602I manual General Information, Preparation, DD02

Page 3

GENERAL INFORMATION

STEP 1.1 PREPARATION

NOTE TO THE INSTALLER

νBe sure to leave these instructions with the Customer.

νEnsure this appliance is properly grounded.

NOTE TO THE CONSUMER

νKeep these Installation Instructions with your Use & Care Manual for future reference.

IMPORTANT

νRead these Instructions completely and carefully.

νObserve all governing Codes and Ordinances.

WARNING

νThese Instructions are intended as a guide only.

νIt is the responsibility of the plumber and electrician to ensure that each installation complies with all Codes and Ordinances.

νInstallation of this DishDrawer requires basic mechanical and electrical skills.

νThe installer is responsible for the DishDrawer installation.

Improper installation is not covered under the Express Warranty Form.

IMPORTANT

νAt the completion of the DishDrawer installation, the Installer must perform Final Checks as per Section 8 of these Installation Instructions.

νEnsure the DishDrawer enclosure is prepared for installation.

νRemove all packaging and materials supplied with the DishDrawer.

νIf you have any questions concerning the installation of this DishDrawer, contact:

Fisher & Paykel Customer Care Centre

27 Hubble

TOLL FREE 1-888-9-FNP USA

Irvine

TOLL FREE 1-888-9-36 7 872

CA 92618

Fax (949) 790 8911

USA

WWW.FISHERPAYKEL.COM

 

STEP 1.2 PRODUCT SPECIFICATIONS & CAVITY DIMENSIONS

SECTION 1

WARNING

Before installing the DishDrawer, remove the house fuse or open the circuit breaker.

Ensure all water connections are turned

OFF.

WARNING

The DishDrawer MUST be installed to allow for future removal from the enclosure if service is required.

Electrical

110-120 VAC

(Water pressure below 7 p.s.i.

 

3 pin socket outlet

(50 kpa) may require the electronics

Drying

Residual Heat

 

to be re-programmed by a Service

 

& Fan Assisted

 

Person at the time of installation)

Water Connection

Recommended Hot

 

 

 

 

140°F Max. (60°C)

 

 

Water Pressure

Maximum 139 p.s.i. (960 kpa)

 

 

 

Minimum 4.3 p.s.i. (30 kpa)

 

 

Page DD_02

Image 3
Contents USA Table of Contents DD02 Product Specifications & Cavity DimensionsGeneral Information PreparationGrounding Instructions Plumbing Water SupplyDD03 DD04 Plumbing Drainage OptionsProduct Parts Additional Product Parts for IntegratedDD05 Foot Slide Retainer Information Assembling the Foot Slide RetainerDD06 DD07 Securing the Foot Slide RetainerConnecting the Services Fitting the DishdrawerDD08 DD09 DD10 Adjusting the FeetDD11 Securing the DishdrawerDD12 Prefinished TOE Kick InstallationSetting the Upper TOE Kick Height Trimming the Lower TOE KickDD13 Trimming the TOE Kick PinsDD14 Adjusting the Upper TOE KickIntegrated Drawer Front & TOE Kick Dimensions Information for Cabinet Maker for Integrated DishdrawerDD15 DD16 DD17 Control Badge PositionDD18 Drawer Front Mounting Bracket Nut HolesDD19 Integrated Drawer Front InstallationDisassembling the Integrated Badge Assembling the Integrated BadgeDD20 DD21 Fitting the Drawer Front Panels to the DishdrawerIntegrated TOE Kick Installation Dishdrawer TOE Kick InformationDD22 DD23 Installation WET TestTroubleshooting Final Checks

DD602I, DD602 specifications

Fisher & Paykel, a renowned brand in the world of home appliances, has made a significant mark with its innovative and reliable dishwashing solutions. Among their popular offerings are the DD602 and DD602I models, which feature a blend of efficiency, design, and advanced technology.

The Fisher & Paykel DD602 is a stylish, under-bench dishwasher designed to blend seamlessly with modern kitchen aesthetics. Its sleek design features a polished stainless steel front that adds a touch of elegance, while the DD602I comes with a customizable front panel that allows homeowners to match it perfectly to their cabinetry, offering a more integrated look. This versatility makes both models a favorite for homeowners looking to maintain a cohesive kitchen design.

One of the standout features of the DD602 and DD602I is their Smart Drive technology. This innovative system was developed to ensure superior washing performance, utilizing fewer moving parts, which enhances reliability and longevity. The intelligent sensing capabilities of the Smart Drive system allow the dishwasher to automatically adjust water usage and cycle time according to the load, optimizing efficiency and reducing energy consumption.

Both the DD602 and DD602I models boast a variety of wash programs tailored to different cleaning needs, including delicate, heavy, and fast cycles. Their spacious interior can comfortably accommodate up to 14 place settings, making them perfect for families or entertaining guests. The adjustable racks and foldable tines provide flexibility in loading, allowing for the safe washing of larger items and stemware.

In terms of quiet operation, these dishwashers stand out with a low decibel rating, ensuring a peaceful home environment while in use. The built-in safety features, such as a triple filter system, prevent food particles from recontaminating the dishes, while a child lock function adds peace of mind for families.

Fisher & Paykel's commitment to sustainability is also reflected in these models. Both the DD602 and DD602I are designed to minimize water and energy consumption, making them a responsible choice for eco-conscious consumers.

Overall, the Fisher & Paykel DD602 and DD602I dishwashers combine modern design and cutting-edge technology to deliver exceptional washing performance, reliability, and efficiency, making them an excellent choice for any kitchen.