Fisher & Paykel DD602I manual Adjusting the Feet, DD10

Page 11

STEP 3.3 ADJUSTING THE FEET

3.3.1

Measure front of product to align to cabinetry as required.

Ensure a minimum of 1/8" (2.5mm) clearance to the underside of the counter.

The height difference between the front and the back of the DishDrawer must be no more than 1/8" (2.5mm).

3.3.2

To adjust the feet, loosen the locknuts and turn the feet. If the product needs to be adjusted to its lowest setting, the plastic surround will need to be removed by unscrewing and lifting it up and slipping it off the foot.

3.3.3

Tighten the locknuts on the rear feet while ensuring the moulded section of the feet line up parallel to the sides of the product.

3.3.4

Lift the back of the DishDrawer and insert the back feet into the Slide Runners. Slide the DishDrawer partially back, leaving enough room to adjust the front feet.

3.3.5

Further adjustment may be made if necessary. Lock the front feet while ensuring the moulded section of the feet line up parallel to the sides of the product.

STEP 3.4 FITTING THE ENDPLATE TO THE CHASSIS (OPTIONAL)

IMPORTANT

The DishDrawer must be levelled so that each corner is at least within 1/8” (3mm) of level.

WARNING

The DishDrawer should not support any part of the kitchen cabinets.

IMPORTANT

Make sure the Inlet and Drain Hoses are not restricted or damaged.

TIP

Each turn of the foot adjusts by 3/64” (1.25mm).

TIP

For ease when sliding the feet back, place a little soap on the Slide Runners.

3.4.1

If the customer sees a need, Endplates may be used to obtain a flush appearance to the side of Toe Kick area of the product.

The Endplate is fitted by peeling off the adhesive backing and adhering to the side of the chassis, lining up the front of the Endplate with the Upper Toe Kick.

Page DD_10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents USA Table of Contents DD02 Product Specifications & Cavity DimensionsGeneral Information PreparationDD03 Grounding InstructionsPlumbing Water Supply DD04 Plumbing Drainage OptionsDD05 Product PartsAdditional Product Parts for Integrated DD06 Foot Slide Retainer InformationAssembling the Foot Slide Retainer DD07 Securing the Foot Slide RetainerDD08 Connecting the ServicesFitting the Dishdrawer DD09 DD10 Adjusting the FeetDD11 Securing the DishdrawerDD12 Prefinished TOE Kick InstallationSetting the Upper TOE Kick Height Trimming the Lower TOE KickDD13 Trimming the TOE Kick PinsDD14 Adjusting the Upper TOE KickDD15 Integrated Drawer Front & TOE Kick DimensionsInformation for Cabinet Maker for Integrated Dishdrawer DD16 DD17 Control Badge PositionDD18 Drawer Front Mounting Bracket Nut HolesDD19 Integrated Drawer Front InstallationDisassembling the Integrated Badge Assembling the Integrated BadgeDD20 DD21 Fitting the Drawer Front Panels to the DishdrawerDD22 Integrated TOE Kick InstallationDishdrawer TOE Kick Information DD23 Installation WET TestTroubleshooting Final Checks

DD602I, DD602 specifications

Fisher & Paykel, a renowned brand in the world of home appliances, has made a significant mark with its innovative and reliable dishwashing solutions. Among their popular offerings are the DD602 and DD602I models, which feature a blend of efficiency, design, and advanced technology.

The Fisher & Paykel DD602 is a stylish, under-bench dishwasher designed to blend seamlessly with modern kitchen aesthetics. Its sleek design features a polished stainless steel front that adds a touch of elegance, while the DD602I comes with a customizable front panel that allows homeowners to match it perfectly to their cabinetry, offering a more integrated look. This versatility makes both models a favorite for homeowners looking to maintain a cohesive kitchen design.

One of the standout features of the DD602 and DD602I is their Smart Drive technology. This innovative system was developed to ensure superior washing performance, utilizing fewer moving parts, which enhances reliability and longevity. The intelligent sensing capabilities of the Smart Drive system allow the dishwasher to automatically adjust water usage and cycle time according to the load, optimizing efficiency and reducing energy consumption.

Both the DD602 and DD602I models boast a variety of wash programs tailored to different cleaning needs, including delicate, heavy, and fast cycles. Their spacious interior can comfortably accommodate up to 14 place settings, making them perfect for families or entertaining guests. The adjustable racks and foldable tines provide flexibility in loading, allowing for the safe washing of larger items and stemware.

In terms of quiet operation, these dishwashers stand out with a low decibel rating, ensuring a peaceful home environment while in use. The built-in safety features, such as a triple filter system, prevent food particles from recontaminating the dishes, while a child lock function adds peace of mind for families.

Fisher & Paykel's commitment to sustainability is also reflected in these models. Both the DD602 and DD602I are designed to minimize water and energy consumption, making them a responsible choice for eco-conscious consumers.

Overall, the Fisher & Paykel DD602 and DD602I dishwashers combine modern design and cutting-edge technology to deliver exceptional washing performance, reliability, and efficiency, making them an excellent choice for any kitchen.
Top Page Image Contents