Fisher & Paykel DD602I manual Fitting the Dishdrawer, Connecting the Services, DD08

Page 9

FITTING THE DISHDRAWER

STEP 3.1 CONNECTING THE SERVICES

3.1.1

Feed the Power Cord, Inlet Hose and Drain Hoses through the Services Hole. Position the DishDrawer in front of the opening.

3.1.2

Connect the Inlet Hose to the HOT WATER SUPPLY. Ensure sealing washer supplied with the accessories is fitted. Hose coupling must be tightened a further half turn after seal contact.

3.1.3

If required, the Drain Hose may be trimmed to a suitable length.

3.1.4

If an air break option is not chosen, then the Drain Hose Support must be used and positioned at least 30" (750mm) above the floor to prevent siphoning of the water during the wash cycle. (See Step 1.4 - Electrical, Plumbing & Drainage Information.)

3.1.5

When using a standpipe option, hoses should not extend further than 2” (50mm) down the standpipe in order to prevent siphoning.

3.1.6

If required, trim the Drain Hose Joiner to the size which matches the waste tee or air break to be used. There are ribs provided to guide cutting.

When using the Drain Hose Joiner, the hoses should be pushed in firmly, 5 clicks.

3.1.7

Attach the Drain Hose Joiner to the waste tee(see Step 1.4). Ensure a snug fit, using the hose clamp supplied.

The supplied Wire Clips should be installed between the two positioning ribs on the Drain Hose Joiner.

Remember to slip the Wire Clips over the

Drain Hoses before connecting to the

Drain Hose Joiner.

SECTION 3

WARNING

Ensure the edges of the Services Hole are smooth or covered. (See Step 1.2 - Product Specifications & Cavity Dimensions.) If the Services Hole is through a metal partition, the hole must be protected with the Edge Protector provided.

WARNING

DO NOT adjust the length of the Inlet Hose.

TIP

Turn the water valve ON to check for any leaks, before pushing the DishDrawer back into its cavity.

WARNING

Attach the Drain Hose Support to the cabinet joinery to prevent siphoning and keep the drain hoses from kinking.

Page DD_08

Page 8 Page 10
Image 9
Page 8 Page 10
Contents USA Table of Contents General Information Product Specifications & Cavity DimensionsPreparation DD02Grounding Instructions Plumbing Water SupplyDD03 DD04 Plumbing Drainage OptionsProduct Parts Additional Product Parts for IntegratedDD05 Foot Slide Retainer Information Assembling the Foot Slide RetainerDD06 DD07 Securing the Foot Slide RetainerConnecting the Services Fitting the DishdrawerDD08 DD09 DD10 Adjusting the FeetDD11 Securing the DishdrawerSetting the Upper TOE Kick Height Prefinished TOE Kick InstallationTrimming the Lower TOE Kick DD12DD13 Trimming the TOE Kick PinsDD14 Adjusting the Upper TOE KickIntegrated Drawer Front & TOE Kick Dimensions Information for Cabinet Maker for Integrated DishdrawerDD15 DD16 DD17 Control Badge PositionDD18 Drawer Front Mounting Bracket Nut HolesDisassembling the Integrated Badge Integrated Drawer Front InstallationAssembling the Integrated Badge DD19DD20 DD21 Fitting the Drawer Front Panels to the DishdrawerIntegrated TOE Kick Installation Dishdrawer TOE Kick InformationDD22 Troubleshooting Installation WET TestFinal Checks DD23

DD602I, DD602 specifications

Fisher & Paykel, a renowned brand in the world of home appliances, has made a significant mark with its innovative and reliable dishwashing solutions. Among their popular offerings are the DD602 and DD602I models, which feature a blend of efficiency, design, and advanced technology.

The Fisher & Paykel DD602 is a stylish, under-bench dishwasher designed to blend seamlessly with modern kitchen aesthetics. Its sleek design features a polished stainless steel front that adds a touch of elegance, while the DD602I comes with a customizable front panel that allows homeowners to match it perfectly to their cabinetry, offering a more integrated look. This versatility makes both models a favorite for homeowners looking to maintain a cohesive kitchen design.

One of the standout features of the DD602 and DD602I is their Smart Drive technology. This innovative system was developed to ensure superior washing performance, utilizing fewer moving parts, which enhances reliability and longevity. The intelligent sensing capabilities of the Smart Drive system allow the dishwasher to automatically adjust water usage and cycle time according to the load, optimizing efficiency and reducing energy consumption.

Both the DD602 and DD602I models boast a variety of wash programs tailored to different cleaning needs, including delicate, heavy, and fast cycles. Their spacious interior can comfortably accommodate up to 14 place settings, making them perfect for families or entertaining guests. The adjustable racks and foldable tines provide flexibility in loading, allowing for the safe washing of larger items and stemware.

In terms of quiet operation, these dishwashers stand out with a low decibel rating, ensuring a peaceful home environment while in use. The built-in safety features, such as a triple filter system, prevent food particles from recontaminating the dishes, while a child lock function adds peace of mind for families.

Fisher & Paykel's commitment to sustainability is also reflected in these models. Both the DD602 and DD602I are designed to minimize water and energy consumption, making them a responsible choice for eco-conscious consumers.

Overall, the Fisher & Paykel DD602 and DD602I dishwashers combine modern design and cutting-edge technology to deliver exceptional washing performance, reliability, and efficiency, making them an excellent choice for any kitchen.
Top Page Image Contents