Fisher & Paykel OR90L Burner parts and pan supports, Replacing the burners

Page 42

40

Care and cleaning

Burner parts and pan supports

You can remove and clean these parts with hot soapy water or non-abrasive detergents. Clean spills regularly before they become burnt on. Do not wash these parts in a dishwasher.

After cleaning, check that the burners and their flame spreaders are dry before replacing correctly.

It is very important to check that the burner flame spreader and the cap have been correctly positioned. Failure to do so can cause serious problems.

Note: To avoid damage to the electric ignition do not try to light the cooktop when the burners are not in place.

Replacing the burners

Check that:

The ignitor is always clean to ensure trouble-free sparking.

The probe is always clean to ensure correct operation of the safety valves.

Note: both the ignitor and probe must be very carefully cleaned using a toothbrush and methylated spirits.

Cap

Flame spreader

Probe

Ignitor

	Figure 34 Replacing the auxiliary,
Figure 33 Auxiliary, rapid and semi-rapid burner parts	rapid and semi-rapid burners

Image 42

Contents Installation instructions Page Contents Safety and warnings InstallationThis film before using the cooker Switch must always be accessible General Explosion Hazard OperationSafety and warnings Important safety precautions Do not use a steam cleaner to clean any part of the cooker Safety and warnings Safety and warnings Installation instructions Within 500 mm of the sidesFitting the adjustable feet Levelling the cookerMoving the cooker BackguardAnti-Tilt Bracket Fitting a stability bracketGas installation GB & IE only Ventilation requirements GB & IE onlyGas connection Do not use a naked flame to test for leaks Replacement of burner injectors To replace the injectorsAdjusting The Minimum Burner Setting Adjusting the minimum burner settingTable for the choice of the injectors Lubrication of the gas tapsConnecting the feeder cable Power SupplyIntroducing your cooker Gas cooktop controlsUsing your gas cooktop Gas burnersBefore using your cooktop Flame failure safety featureLighting the cooktop If the cooktop does not light If the flame is irregularChoosing a burner Diameters of pans which may be used on the cooktopWok stand Cooktop troubleshooting ProblemUsing your main multifunction oven for the first time Using your oven for the first timeClock and timer Using your main oven Function knobCooking functions BakeFAN Bake Automatic cooking Using your compact multifunction oven for the first time Correct position of shelf and panUsing your compact oven Cooking functionsDefrost Compact oven fat filter Using the dish-warming shelf To use the shelf to hold dishesTo use the shelf for cooking Cleaning the outside of the cooker Care and cleaningGeneral advice Cleaning the gas cooktopBurner parts and pan supports Replacing the burnersReplacing the triple ring wok burner Gas tapsCleaning the inside of your ovens Removing the side racksCleaning the enamel cavity Cleaning the fat filterStorage compartment Storage compartmentRemoving and refitting the oven doors To remove the doorTo refit the door Cleaning the oven door glass To remove the glass paneTo refit the glass pane Check the rubber pads are in placeReplacing the oven lamp Removing either oven lampWarranty and service Before you call for service or assistancePage Page Page Page GB IE