C2 Water Softener Brine Pump

March 2004

Manual 599082

In hardware output Diagnostics Test Mode

FU – turn the Fill Water Valve on

P2 – turn the Motor Drain on

C1 – Water Softener Diverter Valve

On – water bypasses the resin tank

Off – water flows through the resin tank

Turn the Brine Pump on in Diagnostics mode. Observe a small quantity of water (approx. 30 ml per min.) flowing out the bottom of the dispenser. (Drop the Dispenser Door down to observe this.) Observe a change in the water level (approximately 120ml per 4 min.) in the Salt Reservoir. The Reservoir should pump dry of water in this time.

Note:- Fill the Salt Reservoir with Salt (and then water if not already) before performing this test.

Pipe Interrupter (Air Break) Function

A critical component in the performance of the Water Softener is the pipe Interrupter (PI). There is a certain amount of spray leakage from the PI which is used to provide water to the Salt Reservoir.

If the spray is inadequate, there will be insufficient water in the Salt Reservoir to make Brine.

If there is too much spray then the excess bypasses the Water Softener and defeats the softening process by pouring untreated water into the Tub.

To check that the amount spray leakage is appropriate:-

Fill the Salt Reservoir with water.

In diagnostics mode, Turn on the Fill Water Valve, and the Motor Drain. Water will flow out of the Dispenser into the Tub, as well as out of the Water Softener Overflow into the Tub.

Observe the flow from the Water Softener Overflow (beside the Dispenser). There should be a trickle (25-100 ml per minute). With experience you can guess what is appropriate. If the trickle is outside these rates, replace the softener as the PI is faulty.

To check that there is water in the Salt Reservoir, remove the Drawer front and observe the level of water in the tank. (A quick way to check that there is water in the Salt Reservoir is to remove the Salt Bung and test the water level by placing your finger down through the opening.)

Detergent or Rinse Aid in the Water Softener

If detergent or rinse aid is poured in to the Salt Reservoir it will destroy the Water Softener. This could also happen if the Salt Bung is left off or falls out. Evidence of this could be white streaks through the Resin.

- 34 -

DS603 I, DS603H, DS603IH, DS603M, DD603I specifications

The Fisher & Paykel DS603 is an innovative and highly efficient dishwasher designed to streamline the dishwashing process while providing exceptional cleaning performance. As part of Fisher & Paykel’s commitment to sustainable living and user-friendly design, the DS603 is packed with features that enhance both functionality and convenience in the kitchen.

One of the standout features of the DS603 is its unique Drawer Dishwasher design. Unlike traditional dishwashers, which have a single, large compartment, the DS603 offers two separate drawers that can be independently operated. This allows users to run smaller loads without the need to fill an entire dishwasher, making it ideal for smaller households or quick cleanups. Additionally, each drawer can accommodate different wash cycles, enabling users to tailor the washing process for delicate glassware or heavily soiled pots and pans.

The DS603 also incorporates a variety of wash programs, including Eco, Fast, and Heavy options, ensuring that dishes are cleaned thoroughly no matter the level of soiling. The Eco wash program is particularly notable, as it uses less water and energy while still providing superb cleaning performance, aligning with modern sustainability goals.

In terms of technology, the DS603 features SmartDrive™ technology, which utilizes a direct current motor that adapts to the load size and type, optimizing the wash performance while minimizing noise. This whisper-quiet operation makes it perfect for open-plan living spaces, ensuring that household activities continue smoothly without the interruption of loud washing cycles.

Another impressive characteristic of the DS603 is its adjustable racking system. Users can configure the interior of the dishwasher to accommodate a variety of dish sizes and shapes, from tall wine glasses to bulky pots. This adaptability enhances user convenience and maximizes the efficiency of each wash cycle.

Furthermore, the DS603 is equipped with a robust water filtration system that ensures clean water is used throughout the washing process. This not only improves washing results but also protects the dishwasher’s internal components from buildup and residue.

The Fisher & Paykel DS603 stands out as a versatile, eco-friendly appliance that combines cutting-edge technology with a user-centric design. Its unique dual-drawer system, customizable wash options, and efficient water use make it a top choice for modern kitchens, reflecting Fisher & Paykel’s dedication to creating quality home appliances that simplify everyday life while being kind to the environment.