GE 49-60451 Controls and features-Beverage Center and Wine Chiller, Safety, Wood Drawer Fronts

Page 6

Instructions

Controls and features—Beverage Center and Wine Chiller.

Safety

Operating

Instructions

Care and Cleaning

Tab (push tab

down on right drawer guide, pull tab up on left drawer guide)

Sub-assembly

To replace, push drawer slide arm back into unit

Sub-assembly

Pull small slide sub- assembly completely forward

Removing Full Extension Drawers

All of the full extension drawers pull out so bottles can be conveniently added or removed.

Any of the full extension drawers can be removed to store larger bottles.

To remove:

1.Pull the full extension drawer out to the STOP position.

2.Push the tab on right drawer guide down while pulling the tab on left guide up, and pull the drawer out.

To replace:

1.Push the drawer slide arm back into the unit.

2.Pull the small slide sub-assembly completely forward.

3.Insert the sides of the drawer back into the guides.

4.Push until the tabs lock into place.

NOTE: Make sure the tabs on the full extension drawer guides are fully engaged before loading any bottles. Pull the drawers out all the way to the STOP position and push back in several times to make sure locking tabs are properly engaged.

Installation Instructions

Wood Drawer Fronts

The full extension drawer fronts on the wine chiller and beverage center are unfinished beech wood. During use, oil from hands may accumulate and stain the wood.

•The drawer fronts may be stained and sealed to match adjacent cabinetry. The tinted glass will make the stained wood appear darker. A true color match can be seen only when the door is opened.

•Apply the stain and sealer according to the manufacturer’s instructions. To avoid unpleasant odor, keep the door open to ventilate and allow the stain/sealer to dry completely before using the product.

NOTE: Natural wood may vary slightly in grain and color.

Tips

Consumer Support

Troubleshooting

Interior Light and Switch

The interior light makes it easy to view your wine and/or beverage labels and enhances the display of your collection.

When the switch is in the OFF position, the light comes on only when the door is opened. When the switch is in the ON position, the light remains on continuously for your maximum viewing pleasure. For best viewing, do not store a bottle on the top shelf directly under the light. Remember to turn off the light when it is no longer needed.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Chiller Care and Cleaning Operating InstructionsTips Consumer Support Troubleshooting InstructionsInstallation Instructions Tips Support Controls and features-Beverage CenterCareand Cleaning ConsumerControls and features-Wine Chiller Inserting Wine BottlesInterior Light and Switch Controls and features-Beverage Center and Wine ChillerSafety Removing Full Extension DrawersCare and cleaning Instructions OperatingRead these instructions completely and carefully When installed in a cornerProduct Clearances Choose the locationAdditional Specifications Installation SpaceSIDE-BY-SIDE Installations Cutout depth should be 24″Grounding the Wine Chiller and Beverage Center Tools RequiredParts Supplied Staining Wood Drawer FrontsReverse Door Swing Level Connect PowerSET Temperature Controls Slide Product Into the CutoutCare and Cleaning Normal operating soundsFans come on in order to cool the appliance Before you call for service… Safety InstructionsInstallation Instructions Operating Troubleshooting Tips Care and Cleaning Operating Instructions Safety InstructionsGE Service Protection Plus General Electric CompanyConsumer Product Ownership Registration GE Will Replace Wine Chiller or Beverage Center WarrantyInstructions Installation What GE Will Not CoverConsumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design StudioRefrigerador Centro de Refrigerantes Antes de desechar su antiguo refrigeradorNo almacene o instale este aparato en el exterior Guarde Estas Instrucciones Control de temperatura Controles y funciones Centro de bebidasInstalación Cuidado y limpieza Estantes de cristalControles y funciones Refrigerador de vino Inserción de botellas de vinoLuz interior e interruptor Cuidado y limpiezaQuitar los cajones de extensión completa Para quitar los cajonesCuidado y limpieza Cuando se instale en una esquina Tolerancias DEL ProductoLea estas instrucciones en su totalidad y con atención Elija la ubicaciónCorte EL Espacio DE InstalaciónInstalaciones Conjuntas La profundidad de sección debe ser de 610 mm 24″Quitar EL Embalaje Herramientas NecesariasPartes Suministradas Destornillador Philips número Llave inglesaInvertir EL Sentido DE Apertura DE LA Puerta Deslizar EL Producto Hacia EL Hueco NivelarConectar LA Alimentación Definir Controles DE TemperaturaSonidos de funcionamiento normales WhooshAntes de llamar para solicitar servicio técnico… Limpieza OperaciónCuidado y Se crea humedad en Notas Seguridad Operación Notas Lo que GE no cubrirá Garantía del refrigerador de vino o centro de bebidasPor el período de GE reemplazará Partes defectuosasGarantías ampliadas Soporte al consumidor Página Web de GE AppliancesSolicite una reparación Piezas y accesorios

197D7188P001, 49-60451 specifications

The GE 49-60451, also known as 197D7188P001, is a vital component within the domain of gas turbine technology, primarily utilized in the aerospace industry. Designed to optimize engine performance and enhance reliability, this model represents the cutting-edge advancements in aircraft propulsion systems.

One of the key features of the GE 49-60451 is its superior materials engineering. It incorporates high-temperature alloys and advanced composite materials that withstand the extreme conditions encountered during flight. This ensures durability and longevity, enabling the turbine to operate efficiently over extended periods, while resisting thermal fatigue and corrosion.

The technology behind the GE 49-60451 revolves around innovative aerodynamics. The design utilizes advanced computational fluid dynamics (CFD) simulations, allowing for the optimization of airflow through the turbine stages. This results in improved thrust-to-weight ratios and enhanced fuel efficiency, which are critical factors in modern aviation where cost-effectiveness is paramount.

Another notable characteristic of the GE 49-60451 is its modular design. This allows for easier maintenance and faster turnaround times in aircraft servicing. The modular approach not only facilitates efficient diagnostics and repairs but also aids in the rapid replacement of components, reducing downtime and enhancing operational availability.

Additionally, the integration of digital technologies is a significant aspect of the GE 49-60451. With the advent of the Internet of Things (IoT), this model is equipped with advanced sensors that monitor various operational parameters in real time. This data is vital for predictive maintenance, enabling operators to preemptively address issues before they escalate, thereby ensuring safer and more reliable flights.

The GE 49-60451 also adheres to stringent environmental standards. Its design emphasizes reduced emissions and lower noise levels, aligning with global initiatives to make aviation more sustainable. The combination of these features contributes to less environmental impact, meeting the needs of modern regulatory frameworks.

In conclusion, the GE 49-60451, or 197D7188P001, stands out for its exceptional engineering, cutting-edge technology, and commitment to sustainability. Its high-performance capabilities make it an indispensable component in the future of aviation propulsion systems, ensuring that operators benefit from both efficiency and reliability while minimizing their environmental footprint.
Top Page Image Contents