GE 197D7188P001, 49-60451 Controls and features-Wine Chiller, Inserting Wine Bottles

Page 5

Controls and features—Wine Chiller.

ge.com

Safety

Temperature Control

The temperature range of the wine chiller is from the low forties to the mid sixties.

Do not install the wine chiller where the temperature will go below 55°F (13°C) or above 90°F (32°C).

The RED WINE setting will provide a storage temperature of approximately 55ºF (13ºC), which is optimum for the storage of red wine.

The WHITE WINE setting will provide a storage temperature of approximately 45ºF (7ºC), which is optimum for white wine.

As with any refrigeration product, there is a slight temperature variance at different locations within the cabinet.

Temperatures at the bottom of the cabinet will be cooler than temperatures at the top of the cabinet.

Position your wine inventory accordingly (i.e. white wines in the cooler zones and red in the warmer zones).

To set the control, turn it to the RED WINE setting. Once the bottles are loaded, allow at least 24 hours before making any adjustments to the initial setting.

Instructions

 

Operating Instructions

 

Care

8 bottle arrangement

9 bottle arrangement

Bottom two drawers

Inserting Wine Bottles

The top five full extension drawers each hold eight bottles, two deep with the necks alternating front to back or nine bottles, alternating with necks pointing inward.

The bottom two full extension drawers hold six bottles each and are loaded with necks facing the rear. Tall bottles should not be loaded on the bottom drawer because they may prevent the door from closing.

Loading Tips and Suggestions

and Cleaning

 

 

Instructions

Installation

 

 

Troubleshooting

Tips

The bottles on the top full extension drawer, directly under the light, will be exposed to a slightly higher temperature when the light is on. Position your wines accordingly and remember to turn off the light when it is no longer needed.

Keep wines that you plan to use for everyday drinking and entertaining on the front half of the full extension drawers where labels are completely visible. Place wines for aging or longer term storage in the rear.

Do not allow children to climb, stand or hang on the wine chiller full extension drawers. They could seriously injure themselves and possibly cause damage to the wine chiller.

Consumer Support

5

Image 5
Contents Chiller Tips Consumer Support Care and CleaningOperating Instructions Instructions TroubleshootingCareand Cleaning Controls and features-Beverage CenterInstallation Instructions Tips Support ConsumerInserting Wine Bottles Controls and features-Wine ChillerSafety Controls and features-Beverage Center and Wine ChillerInterior Light and Switch Removing Full Extension DrawersInstructions Operating Care and cleaningProduct Clearances When installed in a cornerRead these instructions completely and carefully Choose the locationSIDE-BY-SIDE Installations Installation SpaceAdditional Specifications Cutout depth should be 24″Parts Supplied Tools RequiredGrounding the Wine Chiller and Beverage Center Staining Wood Drawer FrontsReverse Door Swing SET Temperature Controls Connect PowerLevel Slide Product Into the CutoutFans come on in order to cool the appliance Care and CleaningNormal operating sounds Installation Instructions Before you call for service…Safety Instructions Operating Care and Cleaning Operating Instructions Safety Instructions Troubleshooting TipsGeneral Electric Company GE Service Protection PlusConsumer Product Ownership Registration Instructions Installation Wine Chiller or Beverage Center WarrantyGE Will Replace What GE Will Not CoverParts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design StudioRefrigerador Centro de No almacene o instale este aparato en el exterior RefrigerantesAntes de desechar su antiguo refrigerador Guarde Estas Instrucciones Instalación Cuidado y limpieza Controles y funciones Centro de bebidasControl de temperatura Estantes de cristalInserción de botellas de vino Controles y funciones Refrigerador de vinoQuitar los cajones de extensión completa Cuidado y limpiezaLuz interior e interruptor Para quitar los cajonesCuidado y limpieza Lea estas instrucciones en su totalidad y con atención Tolerancias DEL ProductoCuando se instale en una esquina Elija la ubicaciónInstalaciones Conjuntas EL Espacio DE InstalaciónCorte La profundidad de sección debe ser de 610 mm 24″Partes Suministradas Herramientas NecesariasQuitar EL Embalaje Destornillador Philips número Llave inglesaInvertir EL Sentido DE Apertura DE LA Puerta Conectar LA Alimentación NivelarDeslizar EL Producto Hacia EL Hueco Definir Controles DE TemperaturaWhoosh Sonidos de funcionamiento normalesCuidado y Antes de llamar para solicitar servicio técnico…Limpieza Operación Se crea humedad en Notas Seguridad Operación Notas Por el período de GE reemplazará Garantía del refrigerador de vino o centro de bebidasLo que GE no cubrirá Partes defectuosasSolicite una reparación Soporte al consumidor Página Web de GE AppliancesGarantías ampliadas Piezas y accesorios

197D7188P001, 49-60451 specifications

The GE 49-60451, also known as 197D7188P001, is a vital component within the domain of gas turbine technology, primarily utilized in the aerospace industry. Designed to optimize engine performance and enhance reliability, this model represents the cutting-edge advancements in aircraft propulsion systems.

One of the key features of the GE 49-60451 is its superior materials engineering. It incorporates high-temperature alloys and advanced composite materials that withstand the extreme conditions encountered during flight. This ensures durability and longevity, enabling the turbine to operate efficiently over extended periods, while resisting thermal fatigue and corrosion.

The technology behind the GE 49-60451 revolves around innovative aerodynamics. The design utilizes advanced computational fluid dynamics (CFD) simulations, allowing for the optimization of airflow through the turbine stages. This results in improved thrust-to-weight ratios and enhanced fuel efficiency, which are critical factors in modern aviation where cost-effectiveness is paramount.

Another notable characteristic of the GE 49-60451 is its modular design. This allows for easier maintenance and faster turnaround times in aircraft servicing. The modular approach not only facilitates efficient diagnostics and repairs but also aids in the rapid replacement of components, reducing downtime and enhancing operational availability.

Additionally, the integration of digital technologies is a significant aspect of the GE 49-60451. With the advent of the Internet of Things (IoT), this model is equipped with advanced sensors that monitor various operational parameters in real time. This data is vital for predictive maintenance, enabling operators to preemptively address issues before they escalate, thereby ensuring safer and more reliable flights.

The GE 49-60451 also adheres to stringent environmental standards. Its design emphasizes reduced emissions and lower noise levels, aligning with global initiatives to make aviation more sustainable. The combination of these features contributes to less environmental impact, meeting the needs of modern regulatory frameworks.

In conclusion, the GE 49-60451, or 197D7188P001, stands out for its exceptional engineering, cutting-edge technology, and commitment to sustainability. Its high-performance capabilities make it an indispensable component in the future of aviation propulsion systems, ensuring that operators benefit from both efficiency and reliability while minimizing their environmental footprint.