GE 197D7188P001, 49-60451 operating instructions Care and cleaning, Instructions Operating

Page 7

Care and cleaning.

ge.com

Cleaning the Outside

 

Safety

IMPORTANT: Unplug the wine chiller or beverage center before cleaning.

Keep the outside clean. The cabinet can be washed with mild soap and water. Rinse thoroughly with clean water. Never use abrasive scouring powders.

Use a glass cleaner or mild soap and water and a soft cloth to clean the glass door. Do not use any abrasive powders.

Wipe the controls with a damp cloth. Dry thoroughly. Do not use cleaning sprays, large amounts of soap and water, abrasives or sharp objects on the panel—they can damage it. Some paper towels can also scratch the control panel.

Do not wipe the wine chiller or beverage center with a soiled dishcloth or towel.

These may leave a residue that can

erode the paint. Do not use scouring pads, powdered cleaners, bleach or cleaners containing bleach because these products can scratch and weaken the paint finish.

Stainless steel. Regularly clean and polish the stainless steel areas (on some models) with a commercially available stainless steel cleaner such as Stainless Steel Magic® to preserve and protect the fine finish. Stainless Steel Magic® is available through GE Parts and Accessories, 800.626.2002, or ge.com. Order part number WX10X15.

Do not use appliance wax or polish on the stainless steel.

Instructions

Instructions

Operating

Care and

Cleaning the Inside

IMPORTANT: Unplug the wine chiller or beverage center before cleaning.

The vinyl door gasket may be cleaned with mild soap and water or a baking soda solution. Rinse well.

After cleaning the door gasket, apply a thin layer of paraffin wax or petroleum jelly to the door gasket at the hinge side. This helps keep the gasket from sticking and bending out of shape.

Use a slightly damp cloth or sponge when cleaning around switches, lights or controls.

Use warm water and baking soda solution— about a tablespoon (15 ml) of baking soda to a quart (1 liter) of water. This both cleans

and neutralizes odors. Thoroughly rinse and wipe dry.

Other parts of the wine chiller or beverage center unit—including the full extension drawers and glass shelves—can be cleaned the same way.

Avoid cleaning cold glass shelves with hot water because the extreme temperature difference may cause them to break. Handle glass shelves carefully. Rough handling of tempered glass can cause it to shatter.

Do not use detergents, scouring powders, spray cleaners or other harsh chemicals to clean the interior.

Installation

Cleaning

Instructions

Drain hole

Drain Hole

Periodically check the drain hole and channel for any debris. If the drain is blocked, condensation will not drain properly.

To check and clean the drain hole, remove the bottom two glass shelves or bottom two full extension drawers. Sweep a damp cloth along the channel in the back of the beverage center. Use a finger to sweep away any debris from the drain hole.

Troubleshooting Tips

Light Bulb Replacement

Unplug the wine chiller or beverage center

To remove the light shield, push in the tab on

before replacing the light bulb.

the left side of the shield and lower it. Replace

 

with a 15 watt appliance bulb.

In the Event of a Power Failure

If the power fails, open the door as

Do not store or use gasoline or other

 

infrequently as possible to maintain

flammable vapors and liquids in the vicinity

the temperature.

of this or any other appliance.

7

Consumer Support

Image 7
Contents Chiller Operating Instructions Care and CleaningTips Consumer Support Instructions TroubleshootingConsumer Controls and features-Beverage CenterCareand Cleaning Installation Instructions Tips SupportInserting Wine Bottles Controls and features-Wine ChillerRemoving Full Extension Drawers Controls and features-Beverage Center and Wine ChillerSafety Interior Light and SwitchInstructions Operating Care and cleaningChoose the location When installed in a cornerProduct Clearances Read these instructions completely and carefullyCutout depth should be 24″ Installation SpaceSIDE-BY-SIDE Installations Additional SpecificationsStaining Wood Drawer Fronts Tools RequiredParts Supplied Grounding the Wine Chiller and Beverage CenterReverse Door Swing Slide Product Into the Cutout Connect PowerSET Temperature Controls LevelNormal operating sounds Care and CleaningFans come on in order to cool the appliance Safety Instructions Before you call for service…Installation Instructions Operating Care and Cleaning Operating Instructions Safety Instructions Troubleshooting TipsGeneral Electric Company GE Service Protection PlusConsumer Product Ownership Registration What GE Will Not Cover Wine Chiller or Beverage Center WarrantyInstructions Installation GE Will ReplaceReal Life Design Studio Schedule ServiceParts and Accessories Consumer Support GE Appliances WebsiteRefrigerador Centro de Antes de desechar su antiguo refrigerador RefrigerantesNo almacene o instale este aparato en el exterior Guarde Estas Instrucciones Estantes de cristal Controles y funciones Centro de bebidasInstalación Cuidado y limpieza Control de temperaturaInserción de botellas de vino Controles y funciones Refrigerador de vinoPara quitar los cajones Cuidado y limpiezaQuitar los cajones de extensión completa Luz interior e interruptorCuidado y limpieza Elija la ubicación Tolerancias DEL ProductoLea estas instrucciones en su totalidad y con atención Cuando se instale en una esquinaLa profundidad de sección debe ser de 610 mm 24″ EL Espacio DE InstalaciónInstalaciones Conjuntas CorteDestornillador Philips número Llave inglesa Herramientas NecesariasPartes Suministradas Quitar EL EmbalajeInvertir EL Sentido DE Apertura DE LA Puerta Definir Controles DE Temperatura NivelarConectar LA Alimentación Deslizar EL Producto Hacia EL HuecoWhoosh Sonidos de funcionamiento normalesLimpieza Operación Antes de llamar para solicitar servicio técnico…Cuidado y Se crea humedad en Notas Seguridad Operación Notas Partes defectuosas Garantía del refrigerador de vino o centro de bebidasPor el período de GE reemplazará Lo que GE no cubriráPiezas y accesorios Soporte al consumidor Página Web de GE AppliancesSolicite una reparación Garantías ampliadas

197D7188P001, 49-60451 specifications

The GE 49-60451, also known as 197D7188P001, is a vital component within the domain of gas turbine technology, primarily utilized in the aerospace industry. Designed to optimize engine performance and enhance reliability, this model represents the cutting-edge advancements in aircraft propulsion systems.

One of the key features of the GE 49-60451 is its superior materials engineering. It incorporates high-temperature alloys and advanced composite materials that withstand the extreme conditions encountered during flight. This ensures durability and longevity, enabling the turbine to operate efficiently over extended periods, while resisting thermal fatigue and corrosion.

The technology behind the GE 49-60451 revolves around innovative aerodynamics. The design utilizes advanced computational fluid dynamics (CFD) simulations, allowing for the optimization of airflow through the turbine stages. This results in improved thrust-to-weight ratios and enhanced fuel efficiency, which are critical factors in modern aviation where cost-effectiveness is paramount.

Another notable characteristic of the GE 49-60451 is its modular design. This allows for easier maintenance and faster turnaround times in aircraft servicing. The modular approach not only facilitates efficient diagnostics and repairs but also aids in the rapid replacement of components, reducing downtime and enhancing operational availability.

Additionally, the integration of digital technologies is a significant aspect of the GE 49-60451. With the advent of the Internet of Things (IoT), this model is equipped with advanced sensors that monitor various operational parameters in real time. This data is vital for predictive maintenance, enabling operators to preemptively address issues before they escalate, thereby ensuring safer and more reliable flights.

The GE 49-60451 also adheres to stringent environmental standards. Its design emphasizes reduced emissions and lower noise levels, aligning with global initiatives to make aviation more sustainable. The combination of these features contributes to less environmental impact, meeting the needs of modern regulatory frameworks.

In conclusion, the GE 49-60451, or 197D7188P001, stands out for its exceptional engineering, cutting-edge technology, and commitment to sustainability. Its high-performance capabilities make it an indispensable component in the future of aviation propulsion systems, ensuring that operators benefit from both efficiency and reliability while minimizing their environmental footprint.