Basic Functions
DISPLAY/BAND
IMPORTANT:
Before you operate the system, complete the preparation procedures.
Adjusting volume and sound
1Turn the VOLUME control
decrease or clockwise to increase volume on the system (or press VOL
control).
➜ Display shows the volume level VOL and a number from
2Press DSC repeatedly to select the desired sound effect: JAZZ / POP / CLASSIC / ROCK.
3Press DBB to switch bass enhancement on or off.
➜ Display shows: 
if the DBB is activated.
4Press INCREDIBLE SURROUND (IS on the remote control) to switch the surround sound effect on or off.
➜ Display shows: 
if activated.
English
Switching the system on
●Press 2 STANDBY ON or SOURCE.
➜The system will switch to the last selected source.
●Press CD, TUNER or TAPE on the remote control.
➜The system will switch to the selected source.
To switch the system to standby mode
●Press 2 STANDBY ON on the system or remote control.
●If in tape mode or recording mode, press STOP•OPENÇ0 first.
➜ The volume level (up to a maximum volume level of 20), interactive sound settings, last selected source and tuner presets will be retained in the player's memory.
Note:
–The effect of INCREDIBLE SURROUND may vary with different types of music.
5Press MUTE on the remote
control to interrupt sound | TAPE | MUTE |
reproduction instantly. |
|
|
➜ Playback will continue | LE | PROGRAM |
without sound. |
|
|
●To activate sound reproduction you can:
–press MUTE again;
–adjust the volume controls;
–change source.
11