Different play modes Shuffle and Repeat

CD/MP3 Operation

3Press TUNING 4 ¢ (on the remote control 4 ¢) to select a desired track.

➜ The album number will change accordingly as you reach the first track of an album by pressing

4or the last track of an album by pressing

¢.

4Press PLAY/PAUSE 2; (on the remote control 2;) to start playback.

●During playback, press DISPLAY/BAND to show the album and track numbers.

3To return to normal playback, press the respective SHUFFLE or REPEAT button until the various SHUFFLE/ REPEAT modes are no longer displayed.

●You can also press STOP 9 to cancel your play mode.

Note:

– The SHUFFLE and REPEAT functions cannot be used simultaneously.

English

Supported MP3 disc formats:

–ISO9660, Joliet, UDF 1.5

–Maximum title number: 999 (depending on filename length)

–Maximum album number: 99

–Supported sampling frequencies: 32 kHz, 44.1 kHz, 48 kHz

–Supported Bit-rates: 32~256 (kbps), variable bitrates

Different play modes: SHUFFLE and REPEAT

You can select and change the various play modes before or during playback.The play modes can also be combined with

PROGRAMME.

SHUFFLE	tracks of the entire disc are
	played in random order
REPEAT ALL ...	repeats the entire disc/
	programme
REPEAT	plays the current track
	continuously
REPEAT ALB ...	repeats all tracks in the current

(for MP3 only) album

1To select your play mode, press the SHUFFLE or REPEAT button before or during playback until the display shows the desired function.

2Press PLAY/PAUSE 2; (on the remote control 2;) to start playback if in the STOP position.

➜ If you have selected SHUFFLE, playback starts automatically.

Programming track numbers

Programme in the STOP position to select and store your disc tracks in the desired sequence. If you like, store any track more than once. Up to 20 (10 for MP3 disc) tracks can be stored in the memory.

1Use the TUNING 4 ¢ (on the remote control 4 ¢) to select your desired track number.

2Press PROGRAM to store.

➜ The number of tracks programmed and PROG are shown briefly, then the selected track number.

3Repeat steps 1-2to select and store all desired tracks.

➜ FULL is displayed if you attempt to programme more than 20 (10 for MP3 disc) tracks.

4To start playback of your disc programme, press PLAY/PAUSE 2; (on the remote control 2;).

Reviewing the programme

●Stop playback and press PROGRAM repeatedly.

●To exit review mode, press Ç.

Erasing the programme

You can erase the programme by:

●pressing STOP 9 once in the STOP mode;

●pressing STOP 9 twice during playback;

●opening the CD compartment;

➜ PROG disappears from the display.