Clock/Timer
DISPLAY/BAND
Activating and deactivating
TIMER
●In standby or during playback, press TIMER once.
➜ Display shows 
if activated, and disappears if deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off by itself after a set period of time.The clock time needs to be set first before the sleep timer can be used.
English
Setting the clock
1In standby, press CLOCK SET.
➜ The clock digits for the hours flash.
2Press TUNING 4 ¢ to set the hours.
3Press CLOCK SET again.
➜ The clock digits for the minutes flash.
●Press SLEEP on the remote control once or more.
➜ Display shows SLEEP and one of the sleep time options in sequence: 60, 45, 30,15, 0, 60...
if you have selected a time.
SLEEP TIME
4Press TUNING 4 ¢ to set the minutes.
5Press CLOCK SET to confirm the time.
Note:
– The backlight for clock display is off in standby.
●To deactivate, press STANDBY ON on the system or remote control.
➜ SLEEP disappears from the display.
Setting the timer
●The system can be used as an alarm clock, whereby the CD or TUNER is switched on at a set time.The clock time needs to be set first before the timer can be used.
1In standby or active mode, press TIMER for more than 2 seconds.
2Press TUNING 4 ¢ to select sound source.
3Press TIMER to confirm your desired mode. ➜ The clock digits for the hours flash.
4Press TUNING 4 ¢ to set the hours.
5Press TIMER again.
➜ The clock digits for the minutes flash.
6Press TUNING 4 ¢ to set the minutes.
7Press TIMER to confirm the time.
➜ The timer is now set and activated.
17