Samsung RS267LBSH Installation of the Refrigerator, Checking the Dimensions of your Entrance Door

INSTALLATION OF THE REFRIGERATOR

Checking the Dimensions of your Entrance Door

Check the dimensions of your entrance door to determine whether the refrigerator can pass through it.

	Model			RS263/RS264/RS265/RS267/RS269
	Capacity (Cu. Ft)			26.1
		Width		35.9
Dimension	Case Height		without Hinge	68.8
			with Hinge	70
(inches)
	Depth		with door	34
			without door	30.5

Selecting the Location for the Refrigerator

•Select a location with easy access to the water supply.

•Select a location with enough space for the refrigerator.

•Select a location without direct exposure to sunlight.

•Select a location with level floor or close to it.

• Before disassembling the freezer door, the water supply line needs to be disconnected.

NOTE	(If not, the water supply line can be damaged.)
	• See “Separating the water supply line from the refrigerator” on the next page.
	Allow sufficient space to circulate the air in the internal cooling system.	4inches
	• When the refrigerator does not have enough space, the internal cooling
	system may not work correctly.
	Allow clearance to the right, left, back and top when installing the
	refrigerator. This has the advantage of reducing power consumption.
NOTE	Do not install the refrigerator where the temperature will go below
	50°F(10°C).
		2 inches
	0.1inch

How to assemble the separable door handle (optional)

- Make sure the “UP” mark on the rear	Fix the handles to the doors	- Check the installation of the handles
of the handle is facing right side up.	by sliding them down firmly.	by pulling on them.
- Match the upper and lower Handle		- If the handles have been inserted
Locking Tabs on the doors to the		correctly, they should not move.
handles.

INSTALLATION INSTRUCTIONS

17