REFRIGERATOR INSTALLATION
17.Remove screw and cover from the front
18.Pull the loose end of the wire harness from opening in the refrigerator top. Pull the loose end of the wire harness and the ground wire from the opening in the top of the refrigerator door. Being careful not to pinch the wires, install the
NOTE: The reversing door parts are supplied with the refrigerator. They are located in the bottom refrigerator door shelf.
19.Connect the ground wire to the top hinge and secure with screw. Connect the Housing connector to the wire harness coming from the top of the door. Con- nect the reed switch connector to the wire under the upper left hinge cover. The third wire coming from the top of the refrigerator is not used.
Left Hinge Cover
Unused Wire
Reed Switch Connector
Housing Connector
Ground Wire
NOTE: The reversing door parts are supplied with the refrigerator. They are located in the bottom refrigerator door shelf.
NOTE: If the reed switch is not reconnected, an alarm bell will go off in
WARNING
Do not damage the wires or connectors. Pinched or cut wires or damaged connectors can result in electric shock, fire, personal injury, and/or product failure.
20.Carefully install the
21.Check the door alignment, door opening, and operation of the refrigerator and freezer lights by opening the refrigerator and freezer doors.
ENGLISH
15