REFRIGERATOR INSTALLATION
REVERSING THE DOORS
1.Remove the refrigerator and freezer doors as described on pages 11 and 12.
2.Remove two screws and front leg cover from the bottom of the refrigerator.
6.Turn the right bracket over and reinstall the hinge shaft in the bracket. Tighten the hinge shaft with the
3.Remove the cap from the back side of the leg cover and insert it into the opening on the opposite rear side.
Cap
Cap
7.Reinstall the two bottom hinges on the bottom of the refrigerator and secure with the four bolts.
NOTE: These hinges should be installed opposite from where they were removed.
ENGLISH
4.Remove four bolts and the left and right bottom hinge assemblies from the bottom of the refrigerator.
5.Unscrew the leg from the right bottom hinge. Using a
8.Remove screw and door stopper from the
13