Whirlpool HD1000XSC7 installation instructions Troubleshooting, Before calling for service

Page 12

Troubleshooting

Before calling for service...

If hot water dispenser does not operate, check these points first:

Has circuit breaker tripped or

 

Is the Temperature Control set

 

house fuse blown?

 

 

to the “Off” position?

 

 

 

 

Is power supply cord plugged

 

 

 

Has the water supply been

 

 

 

in?

 

 

 

turned off?

 

 

 

 

Is the electrical outlet controlled by a switch?

If you need more help, check the chart below. This could save you the cost of a service call for a problem that is not covered by the warranty.

PROBLEM

CHECK THE FOLLOWING

Water is not hot.

 

 

Check that the circuit breaker is not tripped or the house fuse blown.

 

 

 

 

 

Check that power supply cord is plugged into electrical outlet.

 

 

 

 

 

 

Check if the electrical outlet is operated by a switch. The switch may

 

 

 

 

 

 

have turned power off.

 

 

 

Cold water in tank is still being heated. Wait 15 minutes and check

 

 

 

 

 

 

temperature again.

 

 

 

Check that the Temperature Control is set to the “Max” setting.

 

 

 

 

 

 

 

Vapor appears, dispenser makes boiling water noises, or water is too hot.

Adjust Temperature Control to a lower setting that eliminates the vapor or noise. If you live at a high altitude, you may need to lower the thermostat setting to keep water from boiling.

Hot water drips or sputters from spout.

Check that tubing is not bent or kinked.

Adjust Temperature Control to a lower setting that eliminates the drips or sputters.

Check that spout screen is not clogged. See “Caring For Your Hot Water Dispenser,” Page 11.

Check for proper installation of copper tubing from spout to storage tank and from spout to cold water line. See “Installation Instructions,” Pages 8-9.

Water does not flow from spout.

Check that water supply valve is open.

Check that spout screen is not clogged. See “Caring For Your Hot Water Dispenser,” Page 11.

If a water filter is used, check that water pressure to hot water dispenser is 20 psi minimum.

Leaking saddle valve.

 

Tighten saddle valve clamp screws evenly and firmly. Keep both halves

 

 

 

of bracket parallel. Do Not crush water supply tubing.

Water has a “rotten egg” taste.

Hot water dispenser is attached to hot water line. Attach to cold water line.

Install a water filtration system on cold water line to dispenser.

12

Image 12
Contents Installation Instructions Use and Care Guide Record your model’s informationTable of Contents Hot Water Dispenser SafetyParts and Features How your hot water dispenser worksBefore You Start Electrical requirements Water supply requirementsTools and materials needed Parts suppliedInstallation Instructions Numbers 15. correspond To stepsScrew. Bracket will form a y when Do Not lengthen, twist or tightly Bend tubing Lower water temperature Using Your Hot Water Dispenser Before using the first timeTemperature control Dispensing hot waterCleaning the spout screen Caring For Your Hot Water DispenserEnergy-saving tips and preparation for periods Nonuse For short periods 2-30 days of nonuseTroubleshooting Before calling for serviceRequesting Assistance or Service If you need service*…If you need assistance*… Hot Water Dispenser Warranty WhirlpoolPage Whirlpool, U.S.A Registered Trademark of Whirlpool, U.S.A

HD1000XSC7 specifications

The Whirlpool HD1000XSC7 is a compact, high-efficiency dehumidifier designed to create a comfortable indoor environment by effectively managing humidity levels. This model is particularly well-suited for spaces such as basements, laundry rooms, and small apartments, providing a reliable solution for moisture control.

One of the standout features of the HD1000XSC7 is its Energy Star certification, which ensures that the unit operates with lower energy consumption. This not only helps reduce electricity bills but also makes it an environmentally friendly choice for consumers who are conscious about energy use.

With a dehumidification capacity of 10 pints per day, the HD1000XSC7 is ideal for small to medium-sized rooms. It operates efficiently in spaces up to approximately 1,000 square feet, making it versatile enough for various applications. The unit is poised to effectively combat mold and mildew growth, contributing to improved air quality and a healthier living environment.

The Whirlpool HD1000XSC7 incorporates several user-friendly features, including an adjustable humidistat, allowing users to set their desired humidity levels for optimal comfort. The continuous drainage option enables the unit to be used continuously without the need for frequent manual emptying of the water tank, making it a convenient solution for busy households.

Another notable aspect is the easy-to-use digital controls, which simplify the operation and provide real-time humidity levels. This ensures that users can monitor indoor moisture and make necessary adjustments swiftly. Additionally, the filter is washable and reusable, significantly reducing maintenance effort and costs.

Portability is a key factor for many users, and the HD1000XSC7 comes equipped with built-in handles and castor wheels, facilitating easy relocation from room to room. This feature is particularly handy when adjusting dehumidification needs in different areas of the home.

Overall, the Whirlpool HD1000XSC7 is a reliable, efficient, and user-friendly dehumidifier that effectively addresses humidity concerns while providing the convenience modern consumers seek. Its combination of energy efficiency, ease of use, and portability makes it a standout choice for those looking to enhance their indoor air quality. As humidity levels rise, investing in a unit like the HD1000XSC7 can lead to a more comfortable and healthier living environment.