Whirlpool HD1000XSC7 installation instructions Screw. Bracket will form a y when

Page 7

Installation Instructions cont.

NOTE: Do NOT plug power supply cord into outlet.

gasket

4.Lay spout assembly on flat surface with coiled tubing facing up. Using one hand to hold tubing just below spout, carefully straighten tubing with other hand.

Slide gasket over tubing so that lip side of gasket is seated into base of spout.

 

 

5.Loosen square nut until it is

Hold nut, bracket, gasket and tubing

 

 

flush with end of the mounting screw.

in position and insert into hole in sink

 

 

Tip spout bracket against mounting

or counter.

mounting

 

screw. (Bracket will form a “y” when

 

screw

 

in the correct position.)

 

 

 

square

bracket

nut

 

6.Pull up on spout body to keep tension on spout mounting bracket and nut. Tighten screw inside the spout until spout is securely in position. Do not overtighten. Snap on On/Off Cap.

off position

2-1/4"

bracket

7.Position tank vertically beneath spout so that clear tubing from spout reaches center stainless tubing on tank, and tank touches wall. Use a pencil to mark on the wall where the top of tank needs to be located. Set tank aside. Mark a second line 2-1/4" below the first line.

Position mounting bracket on wall so that bottom of mounting bracket is even with the lower line. Use two screws (and plastic anchors if attaching to dry wall) to fasten mounting bracket to wall. Hang tank on bracket.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Record your model’s information Installation Instructions Use and Care GuideHot Water Dispenser Safety Table of ContentsHow your hot water dispenser works Parts and FeaturesBefore You Start Parts supplied Electrical requirementsWater supply requirements Tools and materials neededNumbers 15. correspond To steps Installation InstructionsScrew. Bracket will form a y when Do Not lengthen, twist or tightly Bend tubing Lower water temperature Dispensing hot water Using Your Hot Water DispenserBefore using the first time Temperature controlFor short periods 2-30 days of nonuse Cleaning the spout screenCaring For Your Hot Water Dispenser Energy-saving tips and preparation for periods NonuseBefore calling for service TroubleshootingIf you need service*… Requesting Assistance or ServiceIf you need assistance*… Whirlpool Hot Water Dispenser WarrantyPage Whirlpool, U.S.A Registered Trademark of Whirlpool, U.S.A

HD1000XSC7 specifications

The Whirlpool HD1000XSC7 is a compact, high-efficiency dehumidifier designed to create a comfortable indoor environment by effectively managing humidity levels. This model is particularly well-suited for spaces such as basements, laundry rooms, and small apartments, providing a reliable solution for moisture control.

One of the standout features of the HD1000XSC7 is its Energy Star certification, which ensures that the unit operates with lower energy consumption. This not only helps reduce electricity bills but also makes it an environmentally friendly choice for consumers who are conscious about energy use.

With a dehumidification capacity of 10 pints per day, the HD1000XSC7 is ideal for small to medium-sized rooms. It operates efficiently in spaces up to approximately 1,000 square feet, making it versatile enough for various applications. The unit is poised to effectively combat mold and mildew growth, contributing to improved air quality and a healthier living environment.

The Whirlpool HD1000XSC7 incorporates several user-friendly features, including an adjustable humidistat, allowing users to set their desired humidity levels for optimal comfort. The continuous drainage option enables the unit to be used continuously without the need for frequent manual emptying of the water tank, making it a convenient solution for busy households.

Another notable aspect is the easy-to-use digital controls, which simplify the operation and provide real-time humidity levels. This ensures that users can monitor indoor moisture and make necessary adjustments swiftly. Additionally, the filter is washable and reusable, significantly reducing maintenance effort and costs.

Portability is a key factor for many users, and the HD1000XSC7 comes equipped with built-in handles and castor wheels, facilitating easy relocation from room to room. This feature is particularly handy when adjusting dehumidification needs in different areas of the home.

Overall, the Whirlpool HD1000XSC7 is a reliable, efficient, and user-friendly dehumidifier that effectively addresses humidity concerns while providing the convenience modern consumers seek. Its combination of energy efficiency, ease of use, and portability makes it a standout choice for those looking to enhance their indoor air quality. As humidity levels rise, investing in a unit like the HD1000XSC7 can lead to a more comfortable and healthier living environment.
Top Page Image Contents