Whirlpool HD1000XSC7 Electrical requirements, Water supply requirements, Parts supplied

Page 5

Before You Start cont.

Tools and materials needed

ruler or measuring tape

pliers pencil

gloves

flat-blade screwdriver

safety glasses

tubing cutter

1/4" drill bit

hand or electric drill

open-end wrench(es) to fit saddle valve

1/4" O.D. copper tubing

bucket or pan

2 mounting bracket screws (and

2 plastic anchors if attaching to dry wall)

Saddle valve kit to fit

water supply line

Kit must meet all local codes and ordinances.

Parts supplied

Remove parts from packages. Check that all parts were included.

Electrical requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong. Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

A 120-volt, 60-Hz, AC-only 15- or 20- ampere fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your hot water dispenser be provided. Use an outlet that cannot be turned on/off by a switch.

Water supply requirements

3-prong ground-type wall receptacle

3-prong ground plug

ground prong

power supply cord

Recommended ground method

For your personal safety, the hot water dispenser must be grounded. This appliance is equipped with a power supply cord having a 3-prong ground plug. To minimize possible shock hazard, the cord must be plugged into mating, 3-prong, ground- type wall receptacle, grounded in accordance with all national and local codes and ordinances. If a mating wall receptacle is not available, it is the personal responsibility and obligation of the customer to have a properly grounded, 3-prong, wall receptacle installed by a qualified electrician.

gasket

spout assembly

If local codes permit, the hot water dispenser feed line should be connected to the cold water supply line using a saddle tapping valve.

If this unit is replacing a hot water dispenser connected to a hot water supply, the existing connection may be used.

clamp

tank mounting bracket

tank

Important: If local codes Do Not permit the use of saddle valves, special feed valves can be obtained from your local plumbing supply distributor.

Connection to hot water line is not recommended. Energy will be wasted in heating the water twice and the magnesium rod used in household heating may produce a “rotten egg” taste.

A water filter is recommended if your water supply contains sand, grit or other particles. If a filter is used, the water pressure to the dispenser should not drop below 20 psi.

5

Image 5
Contents Record your model’s information Installation Instructions Use and Care GuideHot Water Dispenser Safety Table of ContentsHow your hot water dispenser works Parts and FeaturesBefore You Start Water supply requirements Electrical requirementsTools and materials needed Parts suppliedNumbers 15. correspond To steps Installation InstructionsScrew. Bracket will form a y when Do Not lengthen, twist or tightly Bend tubing Lower water temperature Before using the first time Using Your Hot Water DispenserTemperature control Dispensing hot waterCaring For Your Hot Water Dispenser Cleaning the spout screenEnergy-saving tips and preparation for periods Nonuse For short periods 2-30 days of nonuseBefore calling for service TroubleshootingIf you need assistance*… Requesting Assistance or ServiceIf you need service*… Whirlpool Hot Water Dispenser WarrantyPage Whirlpool, U.S.A Registered Trademark of Whirlpool, U.S.A

HD1000XSC7 specifications

The Whirlpool HD1000XSC7 is a compact, high-efficiency dehumidifier designed to create a comfortable indoor environment by effectively managing humidity levels. This model is particularly well-suited for spaces such as basements, laundry rooms, and small apartments, providing a reliable solution for moisture control.

One of the standout features of the HD1000XSC7 is its Energy Star certification, which ensures that the unit operates with lower energy consumption. This not only helps reduce electricity bills but also makes it an environmentally friendly choice for consumers who are conscious about energy use.

With a dehumidification capacity of 10 pints per day, the HD1000XSC7 is ideal for small to medium-sized rooms. It operates efficiently in spaces up to approximately 1,000 square feet, making it versatile enough for various applications. The unit is poised to effectively combat mold and mildew growth, contributing to improved air quality and a healthier living environment.

The Whirlpool HD1000XSC7 incorporates several user-friendly features, including an adjustable humidistat, allowing users to set their desired humidity levels for optimal comfort. The continuous drainage option enables the unit to be used continuously without the need for frequent manual emptying of the water tank, making it a convenient solution for busy households.

Another notable aspect is the easy-to-use digital controls, which simplify the operation and provide real-time humidity levels. This ensures that users can monitor indoor moisture and make necessary adjustments swiftly. Additionally, the filter is washable and reusable, significantly reducing maintenance effort and costs.

Portability is a key factor for many users, and the HD1000XSC7 comes equipped with built-in handles and castor wheels, facilitating easy relocation from room to room. This feature is particularly handy when adjusting dehumidification needs in different areas of the home.

Overall, the Whirlpool HD1000XSC7 is a reliable, efficient, and user-friendly dehumidifier that effectively addresses humidity concerns while providing the convenience modern consumers seek. Its combination of energy efficiency, ease of use, and portability makes it a standout choice for those looking to enhance their indoor air quality. As humidity levels rise, investing in a unit like the HD1000XSC7 can lead to a more comfortable and healthier living environment.