Whirlpool HD1000XSC7 installation instructions Lower water temperature

Page 9

Installation Instructions cont.

 

13.Connect water supply line

NOTE: If you need to remove tubing,

 

from saddle valve to spout copper

push down on collet. Pull tubing out

water supply

tubing with the factory-assembled

of quick-connect fitting.

line

quick-connect fitting. Push water

 

quick-connect

supply line tubing straight into fitting

 

as far as it will go. Pull on tubing.

 

fitting

 

 

The tubing should not come out

 

 

when properly installed. Turn the

 

copper

saddle valve handle counterclockwise

 

tubing

to open water line.

 

saddle

 

 

valve

 

 

NOTE: Do NOT plug power supply cord into outlet.

14.Turn Temperature Control counterclockwise to “Off” position.

On

15.Push down and turn the

 

 

On/Off Cap clockwise to open spout.

 

Hold cap open to fill tank (about 1

 

minute). When tank is full, water will

 

flow from spout. Release cap.

NOTE: Turn Temperature Control to “Off” position before plugging hot water dispenser into power supply. If tank is empty and thermostat is in an “On” position when the

power supply cord is connected, the heater will overheat causing an unpleasant taste, black specks in the water, and permanent damage to the heater seals.

16.Plug power supply cord into grounded outlet.

Turn Temperature Control clockwise to highest position.

Water in tank will reach maximum temperature in approximately

15 minutes.

When water is heating, you may hear gurgling noises coming from the tank. There may also be some spitting or

hot water flow from the faucet. This is normal for the initial heat-up of the dispenser.

Turn Temperature Control to lower temperature setting if you notice vapor or hear boiling noise.

NOTE: Temperature Control controls tank heater, not water delivery. Rotate Temperature Control clockwise to raise water temperature, counterclockwise to

lower water temperature.

9

 

Image 9
Contents Record your model’s information Installation Instructions Use and Care GuideHot Water Dispenser Safety Table of ContentsHow your hot water dispenser works Parts and FeaturesBefore You Start Water supply requirements Electrical requirementsTools and materials needed Parts suppliedNumbers 15. correspond To steps Installation InstructionsScrew. Bracket will form a y when Do Not lengthen, twist or tightly Bend tubing Lower water temperature Before using the first time Using Your Hot Water DispenserTemperature control Dispensing hot waterCaring For Your Hot Water Dispenser Cleaning the spout screenEnergy-saving tips and preparation for periods Nonuse For short periods 2-30 days of nonuseBefore calling for service TroubleshootingRequesting Assistance or Service If you need service*…If you need assistance*… Whirlpool Hot Water Dispenser WarrantyPage Whirlpool, U.S.A Registered Trademark of Whirlpool, U.S.A

HD1000XSC7 specifications

The Whirlpool HD1000XSC7 is a compact, high-efficiency dehumidifier designed to create a comfortable indoor environment by effectively managing humidity levels. This model is particularly well-suited for spaces such as basements, laundry rooms, and small apartments, providing a reliable solution for moisture control.

One of the standout features of the HD1000XSC7 is its Energy Star certification, which ensures that the unit operates with lower energy consumption. This not only helps reduce electricity bills but also makes it an environmentally friendly choice for consumers who are conscious about energy use.

With a dehumidification capacity of 10 pints per day, the HD1000XSC7 is ideal for small to medium-sized rooms. It operates efficiently in spaces up to approximately 1,000 square feet, making it versatile enough for various applications. The unit is poised to effectively combat mold and mildew growth, contributing to improved air quality and a healthier living environment.

The Whirlpool HD1000XSC7 incorporates several user-friendly features, including an adjustable humidistat, allowing users to set their desired humidity levels for optimal comfort. The continuous drainage option enables the unit to be used continuously without the need for frequent manual emptying of the water tank, making it a convenient solution for busy households.

Another notable aspect is the easy-to-use digital controls, which simplify the operation and provide real-time humidity levels. This ensures that users can monitor indoor moisture and make necessary adjustments swiftly. Additionally, the filter is washable and reusable, significantly reducing maintenance effort and costs.

Portability is a key factor for many users, and the HD1000XSC7 comes equipped with built-in handles and castor wheels, facilitating easy relocation from room to room. This feature is particularly handy when adjusting dehumidification needs in different areas of the home.

Overall, the Whirlpool HD1000XSC7 is a reliable, efficient, and user-friendly dehumidifier that effectively addresses humidity concerns while providing the convenience modern consumers seek. Its combination of energy efficiency, ease of use, and portability makes it a standout choice for those looking to enhance their indoor air quality. As humidity levels rise, investing in a unit like the HD1000XSC7 can lead to a more comfortable and healthier living environment.