Whirlpool HD1000XSC7 installation instructions Do Not lengthen, twist or tightly Bend tubing

Page 8

Installation Instructions cont.

 

NOTE: Do NOT plug power supply cord into outlet.

 

8.Connect 1/4" spout tubing

NOTE: If you need to remove tubing,

 

(longer tubing) to the rear quick-

push down on collet. Pull tubing out

 

connect fitting on top of tank. Push

of quick-connect fitting.

quick-

tubing straight into fitting as far as it

 

will go. Pull on tubing. The tubing

 

connect

should not come out when properly

 

fitting

 

installed.

 

 

 

collet

Do Not lengthen, twist or tightly

 

 

bend tubing.

 

 

9.Connect clear tubing from spout

 

 

to center tank tubing using clamp.

 

 

Make sure clear tubing does not kink.

 

clamp

 

 

clear tubing

10.Install saddle valve following kit instructions. If water supply line is not copper, shut off water supply and drain line.

Drill a 1/4" hole into water supply line for the saddle valve piercing pin.

closed

11.Turn saddle valve handle clockwise until lance pierces soft copper tubing and valve is firmly seated. If the water line is not copper, turn the saddle valve handle clockwise until the valve is firmly seated. The valve is now in the closed position.

Place a bucket under open end of water supply line. Turn on main water supply valve to pressurize cold water line. Check for leaks.

open

12.Slowly open saddle valve and flush line into bucket to remove any foreign material that may have been trapped in the supply line during saddle valve installation.

Close saddle valve.

8

Image 8
Contents Installation Instructions Use and Care Guide Record your model’s informationTable of Contents Hot Water Dispenser SafetyParts and Features How your hot water dispenser worksBefore You Start Electrical requirements Water supply requirementsTools and materials needed Parts suppliedInstallation Instructions Numbers 15. correspond To stepsScrew. Bracket will form a y when Do Not lengthen, twist or tightly Bend tubing Lower water temperature Using Your Hot Water Dispenser Before using the first timeTemperature control Dispensing hot waterCleaning the spout screen Caring For Your Hot Water DispenserEnergy-saving tips and preparation for periods Nonuse For short periods 2-30 days of nonuseTroubleshooting Before calling for serviceIf you need assistance*… Requesting Assistance or ServiceIf you need service*… Hot Water Dispenser Warranty WhirlpoolPage Whirlpool, U.S.A Registered Trademark of Whirlpool, U.S.A

HD1000XSC7 specifications

The Whirlpool HD1000XSC7 is a compact, high-efficiency dehumidifier designed to create a comfortable indoor environment by effectively managing humidity levels. This model is particularly well-suited for spaces such as basements, laundry rooms, and small apartments, providing a reliable solution for moisture control.

One of the standout features of the HD1000XSC7 is its Energy Star certification, which ensures that the unit operates with lower energy consumption. This not only helps reduce electricity bills but also makes it an environmentally friendly choice for consumers who are conscious about energy use.

With a dehumidification capacity of 10 pints per day, the HD1000XSC7 is ideal for small to medium-sized rooms. It operates efficiently in spaces up to approximately 1,000 square feet, making it versatile enough for various applications. The unit is poised to effectively combat mold and mildew growth, contributing to improved air quality and a healthier living environment.

The Whirlpool HD1000XSC7 incorporates several user-friendly features, including an adjustable humidistat, allowing users to set their desired humidity levels for optimal comfort. The continuous drainage option enables the unit to be used continuously without the need for frequent manual emptying of the water tank, making it a convenient solution for busy households.

Another notable aspect is the easy-to-use digital controls, which simplify the operation and provide real-time humidity levels. This ensures that users can monitor indoor moisture and make necessary adjustments swiftly. Additionally, the filter is washable and reusable, significantly reducing maintenance effort and costs.

Portability is a key factor for many users, and the HD1000XSC7 comes equipped with built-in handles and castor wheels, facilitating easy relocation from room to room. This feature is particularly handy when adjusting dehumidification needs in different areas of the home.

Overall, the Whirlpool HD1000XSC7 is a reliable, efficient, and user-friendly dehumidifier that effectively addresses humidity concerns while providing the convenience modern consumers seek. Its combination of energy efficiency, ease of use, and portability makes it a standout choice for those looking to enhance their indoor air quality. As humidity levels rise, investing in a unit like the HD1000XSC7 can lead to a more comfortable and healthier living environment.