Philips MCi900/12 user manual Wired connection Enter IP address manually, MCi900 Internet

On the unit, select [Wired (Ethernet)].

Connect to the Internet

•Connect to the Internet as prompted. »» You enter Home screen after the first-

time setup is complete.

MCi900

Internet

Note

•• Ensure that the router connects to the Internet directly and no dial-up is required on the computer.

Acquiring IP address...

Press <Back> to enter IP address manually

Wired connection: Enter IP address manually

MCi900

Stop getting Auto IP

1 Use an Ethernet cable to connect the unit to the router.

2

3 Press BACK on the remote control to stop getting auto IP.

34EN

Get the IP address of the router

•Consult the user manual of the router.

•Or, to check for the settings of the router, enter the IP address (e.g. 192.168.1.1) in the web browser (e.g. Internet Explorer) of the computer, and then, get the desired information in the setup page.

Assign the IP address manually

•On the MCi900, enter an IP address that allows the unit to be in the same subnet as the router.

For example, if the router has

IP address: 192.168.1.1, Subnet mask:

255.255.255.000;

Then, enter the following on the unit:

IP address: 192.168.1.XX (where XX denotes a number), Subnet mask:

255.255.255.000.