4 To set the alarm time,
•Press and hold 
/
, or press 
/
repeatedly until you reach the desired digits. Press OK to confirm.
•Or, enter the desired digits by using the alphanumeric buttons on the remote control.
»» The alarm icon 
appears on the screen.
To play a song or Internet radio station as the next alarm sound
1 Ensure that you have selected [Music] in the Step 3 above;
2 Before you turn off MCi900, or switch MCi900 to active standby,
•Go to [Media Library], and select and play the desired song;
•Or, go to [Internet Radio], and tune to the desired station.
Use the alarm
At the set alarm time, music/Internet radio plays as desired, or the buzzer sounds.
Note
•• The alarm sounds even if you have switched MCi900 to active standby or Eco standby.
•• The buzzer sounds instead, if MCi900 fails to connect to a music library or an Internet radio station.
•• MCi900 is unmuted if it has been muted.
•• The alarm sounds in a higher volume if the volume level is lower than minimum.
To snooze the alarm
•Press any button on the unit or the remote control (except for the volume buttons).
»» The alarm sounds again 15 minutes later.The alarm icon remains.
To stop the alarm
•Press and hold 
or 
.
»» The alarm is stopped.The alarm icon disappears.
»» The alarm sounds again next day.
To turn off the alarm
•Go to [Settings] > [Clock settings] > [Alarm]. Select [Alarm off] and
press OK on the remote control.
Sleep timer
With the sleep timer, you can have MCi900
turned off automatically after the set timer duration.
To set the time duration
1 From the home screen, go to [Settings] > [Clock settings] > [Sleep timer].
•Or, press SETTINGS on the remote control to enter [Settings].
2 Select an option. Press OK to turn it on.
Date and time
The date and time can be set automatically or manually.
Automatic setting
For automatic clock setting, use the online service over the Internet, or use the time
signal from FM RDS radio.
Through the online service over the Internet
1 Turn on the unit, if necessary.
•Ensure that the unit is connected to the home
2 From Home screen, select [Settings] > [Clock settings] > [Date and time].
•Or, press SETTINGS on the remote control to enter [Settings].
3 In [Date and time], select [Current date
and time] > [Automatic (Internet)].
»» The unit starts auto time setting over the Internet.
»» A message appears when the setting is done.
58EN