Philips HK-1008-MCi900 2010, MCi900/12 Network settings, Setup network, Press OK to confirm

Follow Step 1-2 under “Manual setting”.

13

Automatic (Internet)

Automatic (RDS)

Manual

Tip

•• According to the location and time zone you

select, the unit can have the clock time set

and adjusted automatically through the online service over the Internet.

•• To check and change current location and time zone, go to [Settings] > [Location and time zone].

Through time signals from FM RDS radio

1 On the unit, turn on the FM radio, if necessary.

•Ensure that the FM antenna is connected properly (see ‘Connect the FM antenna’ on page 26).

2 On the first location for preset stations, store an FM RDS station that transmits time signals.

3 From Home screen, select [Settings] > [Clock settings] > [Date and time].

•Or, press SETTINGSon the remote control to enter [Settings].

4 In [Date and time], select [Current date and time] > [Automatic (RDS)].

»» The unit searches for the first preset station automatically.

»» The time is set according to time signals from the station.

Manual setting

1 Turn on the unit, if necessary.

2	From Home screen, select [Settings] >
	[Clock settings] >[Date and time].		gl i s h
	•	Or, press SETTINGS on the remote
		control to enter [Settings].	E n
3	In [Date and time], select [Current date
4	and time] > [Manual].
	To enter date and time,
	•	Press or to select the entry
		location;

•Use the alphanumeric buttons to enter desired digits;

•Press OK to confirm.

• You can also press or repeatedly, or press and hold or until the desired digit appears.

Set date/time format

Select how date and time are displayed in the clock.

1

2 In [Date and time], go to [Time format] or [Date format] to select options.

Network settings

Setup network

After the first-time setup, you can change how MCi900 connectsto home Wi-Fi/wired network:

•Switch between different connection methods (wireless or wired, automatic or manual);

•Switch between different routers.

To do so, do the following:

1From Home screen, go to [Settings] > [Network settings] > [Setup network].

•Or, press SETTINGS on the remote control to enter [Settings].

2Connect MCi900 as you did in the first- time setup (see ‘Connect to home Wi-Fi/ wired network’ on page 29).

EN 59