Alto-Shaam 1200-SK/III, 1000-SK/III manual Clean the Door Vents

Page 22

CARE AND CLEANING

EQUIPMENT CARE Under normal circumstances, this oven should provide you with long and trouble-free service. There is no preventative maintenance required, however, the following Equipment

Care Guide will maximize the potential life and trouble free operation of this oven.

The cleanliness and appearance of this equipment will contribute considerably to operating efficiency and savory, appetizing food. Good equipment that is kept clean works better and lasts longer.

CLEAN DAILY

1. Disconnect unit from power source and let cool.

2. Remove all detachable items such as wire shelves, side racks, and drip pans. Clean these items separately.

3. Wipe the interior metal surfaces of the oven with a paper towel to remove loose food debris.

4.Clean the interior metal surfaces of the cabinet with a damp clean cloth or sponge and any good commercial detergent.

NOTE: Avoid the use of abrasive cleaning compounds, chloride-based cleaners, or cleaners containing quaternary salts. Never use hydrochloric acid (muriatic acid) on stainless steel.

5.Spray heavily soiled areas with a water soluble degreaser and let stand for 10 minutes, then remove soil with a plastic scouring pad.

6.Wipe control panel, door vents, door handles, and door gaskets thoroughly since these areas harbor food debris.

7.Rinse surfaces by wiping with sponge and clean warm water.

8.Remove excess water with sponge and wipe dry with a clean cloth or air dry. Leave doors open until interior is completely dry. Replace side racks and shelves.

9.Wipe door gaskets and control panel dry with a clean, soft cloth.

10.Interior can be wiped with a sanitizing solution after cleaning and rinsing. This solution must be approved for use on stainless steel food contact surfaces.

DANGER

DISCONNECT UNIT FROM

POWER SOURCE BEFORE

CLEANING OR SERVICING.

11.To help maintain the protective film coating on polished stainless steel, clean the exterior of the cabinet with a cleaner recommended for stainless steel surfaces. Spray the cleaning agent on a clean cloth and wipe with the grain of the stainless steel.

12.Clean any glass with a window cleaner.

Always follow appropriate state or local health (hygiene) regulations regarding all applicable cleaning and sanitation requirements for equipment.

CLEAN THE DOOR VENTS

Door vents need to be inspected and cleaned as required.

CLEAN THE PROBES DAILY

Remove all food soil from probes. Wipe entire probe and cable assembly

with warm detergent solution and a clean cloth. Remove detergent by wiping each probe and cable with clean rinse water and a cloth. Wipe

probes and probe brackets with disposable alcohol pad or sanitizing solution recommended for food contact surfaces. Allow probe and cable to air dry in probe holding bracket.

CHECK THE COOLING FAN IN THE OVEN CONTROL AREA

While the oven is warm, check that the cooling fan in the oven control area is functioning. The fan is located at the back of the unit, toward the top.

CHECK OVERALL CONDITION OF

OVEN ONCE A MONTH

Check the oven once a month for physical damage and loose screws. Correct any problems before they begin to interfere with the operation of the oven.

DO NOT USE OVEN IF CONTROLS ARE NOT PROPERLY FUNCTIONING

Refer to the Troubleshooting Guide located in this manual or call an authorized service technician.

D A N G E R

AT NO TIME SHOULD THE INTERIOR

OR EXTERIOR BE STEAM CLEANED,

HOSED DOWN, OR FLOODED WITH

WATER OR LIQUID SOLUTION OF

ANY KIND. DO NOT USE WATER JET

TO CLEAN.

SEVERE DAMAGE OR

ELECTRICAL HAZARD

COULD RESULT.

WARRANTY BECOMES VOID IF

APPLIANCE IS FLOODED

deluxe control smokers installation/operation/service manual - pg. 20

Image 22
Contents Installation Sanitation L I V E R Y P a C K I N GSafety Procedures Precautions N G E RSite Installation Clearance Requirements767-SK/III 1767-SK/III 1000-SK/III 1200-SK/III Options and Accessories Options and AccessoriesStacking Instructions Leveling Appliance must be secured To building structureDrip Tray Installation Instructions Electrical Connection Electrical 767-SK/IIIStart UP Operation Audible SignalsUser Safety Information Severe Damage or Electrical Hazard Could ResultControl Features ON/OFF KeyOperating Features & Functions Arrow KeysU T I O N Programming a Preset Hot Smoke Procedure Preset Keys Lock and Unlock User OptionsGeneral Holding Guideline Cleaning and Preventive Maintenance Daily Prong CleaningClean the Door Vents N I T a T I O N Troubleshooting R V I C ETroubleshooting Internal Electrical Components No power. Display will not lightExterior Service View a 767-SK/III ShownExterior Service Parts List a Description QTYExterior Service View B Exterior Service Parts List B PROBE, RECEPTICAL, 600MM WireElectronic Components C Electronic Components Parts List C Cable Heating KIT #4881 one per compartmentPage Page Page Page Page Page Limited Warranty
Related manuals
Manual 59 pages 13.69 Kb

1000-SK/III, 1200-SK/III specifications

Alto-Shaam 1200-SK/III and 1000-SK/III are innovative cooking solutions designed for food service operations seeking efficiency, versatility, and quality. These heated holding cabinets are uniquely constructed to manage food temperature and quality, ensuring that meals remain hot and fresh for extended periods without compromising taste or texture.

One of the standout features of the Alto-Shaam 1200-SK/III is its patented Halo Heat technology. This technology provides consistent heat distribution throughout the cabinet, minimizing the risk of overcooking or drying out food. Halo Heat creates a gentle, even warmth that preserves food quality by maintaining the natural moisture levels. Additionally, it eliminates the need for water pans, simplifying the operating process and reducing maintenance tasks.

On the other hand, the 1000-SK/III model showcases similar capabilities but in a more compact size, making it ideal for establishments with limited space. Both models are designed with a digital control panel that allows for precise temperature adjustments from 80°F to 200°F, accommodating various food holding requirements and settings. This control feature not only streamlines operation but also enhances user experience, making it easy to monitor and maintain optimal food temperatures.

The construction of both models emphasizes durability and ease of use. They are built with stainless steel exteriors and interiors, ensuring long-lasting performance and easy cleaning. The accessibility of the interior space also allows for convenient loading and unloading of food pans, enhancing workflow in busy kitchen environments.

Energy efficiency is another important characteristic of the Alto-Shaam 1200-SK/III and 1000-SK/III. They are designed to consume less electricity while delivering exceptional performance. This not only helps businesses save on energy costs but also aligns with the growing emphasis on sustainability within the food service industry.

In summary, the Alto-Shaam 1200-SK/III and 1000-SK/III boast an array of essential features including innovative Halo Heat technology, adjustable temperature controls, durable construction, and energy efficiency. Together, these models provide a reliable solution for food service operators looking to maintain the integrity of their dishes while enhancing overall operational efficiency. Whether for high-capacity operations or smaller kitchens, these heated holding cabinets are valuable assets in delivering high-quality dining experiences.