INSTALLATION
STEP 3: PREPARE THE VENTING BLOWER
4.Reassemble the blower wire. See Figure 15.
5.Rotate the unit so that the exhaust ports face the rear of the cabinet. See Figure 16. When you insert blower unit, blower wire must be like figure 16.
6.Place blower unit back into cabinet. Check that the exhaust ports face towards the rear of the cabinet. See Figure 17.
7.Reattach the blower plate to cabinet so the exhaust ports and blower plate opening are aligned. Attach with one blower unit mounting screw and then one blower plate mounting screw. See Figure 18.
1 unit
exhaust ports
Figure 15 | Figure 16 |
|
| plate | |
|
| mounting | screws |
exhaust | blower | unit |
|
ports | exhaust | ports |
|
| "'_ blower unit | ||
|
| ||
Figure 17 |
| mounting | screws |
| Figure 18 |
| |
ROOM-VENTED (Recirculating) INSTALLATION:
1.Remove one blower unit mounting screw and one blower plate screw. Remove the blower plate from cabinet.
See Figure 19.
2. Carefully lift the blower unit out of the microwave oven. | ___ | bml°uWetrinla_erews |
3.Rotate blower unit 90° so the exhaust ports face the front of the cabinet. See Figure 20.
blower unit
4.Place blower unit back into microwave oven.
5.Reattach blower plate to microwave oven. Attach with the one blower unit mounting screw and then the one blower plate mounting screw.
See Figure 21.
\
mountingscrews
Figure 19
_ | blower plate |
| mounting screws |
unit
"'_ blower unit mounting screws
Figure 20 | Figure 21 |