Denon AVR-1082 manual Setting the Digital In Assignment

Page 14

ENGLISH

7

Select “Yes”.

 

 

TUNING

BAND

MODE

When you adjust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode, the channel level adjustments made will affect ALL surround modes. Consider this mode a Master Channel Level adjustment mode.

After you have completed the SYSTEM SETUP CHANNEL LEVEL adjustments, you can then activate the individual surround modes and adjust channel levels that will be remembered for each of those modes. Then, whenever you activate a particular surround sound mode, your preferred channel level adjustments for just that mode will be recalled. Check the instructions for adjusting channel levels within each surround mode on page 27.

8

a. If the “Auto” mode is selected:

Test tones are automatically emitted from the different

speakers.

The test tones are emitted from the different speakers in the following order, at 4-second intervals the first time and second time around, 2-second intervals the third time around and on:

Flashing

1spkr

SB

FL

C

FR

SR

SBR

SBL

SL

SW

 

 

 

 

2spkrs

 

 

 

Example: When the volume is set to

–12 dB while the test tone is being produced from the subwoofer

You can adjust the channel levels for each of the following surround modes: DIRECT, STEREO, 5/7 CH STEREO, DOLBY/DTS SURROUND, WIDE SCREEN, ROCK ARENA, JAZZ CLUB, VIDEO GAME, MONO MOVIE, and MATRIX.

When using either surround speakers A or B, or when using surround speakers A and B at the same time, be sure to adjust the balance of playback levels between each channel for the various selections of “A or B” and “A and B”.

Setting the Digital In Assignment

•This setting assigns the digital input jacks of the AVR-3802 for the different input sources.

TUNING

BANDMODE

TUNING

TUNING

BANDMODE

TUNING

When the surround back speaker setting is set to “1spkr” for “Speaker Configuration”, this is set to “SB”.

Use the CURSOR buttons to adjust all the speakers to the same volume.

The volume can be adjusted between –12 dB and +12 dB in units of 1 dB.

b. When the “Manual” mode is selected

Use the CURSOR left and right to select the speaker for which you want to output test tones, then use the CURSOR up and down to adjust so that the volume of the test tones from the various speakers is the same.

Flashing

1

TUNING

At the System Setup Menu select “Digital In Assignment”.

 

BAND

MODE

 

TUNING

 

2

ENTER

Switch to the Digital In Assignment screen.

SHIFT

 

TUNING

BAND

MODE

Example: When the volume is set to

 

 

–12 dB while the

 

TUNING

subwoofer is selected

 

 

9

ENTER

After the above settings are completed, press the ENTER button.

SHIFT

The “Channel Level” screen reappears.

To cancel the settings, select “Level Clear” and “Yes” on the “Channel Level” screen, then make the settings again.

The level of each channel should be adjusted to 75 dB (C-weighted, slow meter mode) on a sound level meter at the listening position.

If a sound level meter is not available adjust the channels by ear so the sound levels are the same. Because adjusting the subwoofer level test tone by ear is difficult, use a well known music selection and adjust for natural balance.

NOTE: When adjusting the level of an active subwoofer system, you may also need to adjust the subwoofer’s own volume control.

3

TUNING

 

 

Select the digital input jack to be assigned to the input source.

 

 

TUNING

• To select the input source

 

BAND

BAND

MODE

• To select the digital input jack

 

MODE

 

 

 

TUNING

 

TUNING

Select “OFF” for input sources for which no digital input jacks are used.

 

 

 

 

If “Yes” is selected for “Default”, the settings are automatically reset

 

 

 

 

to the default values.

4

ENTER

Enter the setting.

SHIFT

The System Setup Menu reappears.

NOTES:

•The OPTICAL 3 jacks on the AVR-3802’s rear panel are equipped with an optical digital output jack for recording digital signals on a CD recorder, MD recorder or other digital recorder. Use this for digital recording between a digital audio source (stereo - 2 channel) and a digital audio recorder.

•Do not connect the output of the component connected to the OPTICAL 3 OUT jack on the AVR-3802’s rear panel to any jack other than the OPTICAL 3 IN jack.

•“PHONO” and “TUNER” cannot be selected on the Digital In Assignment screen.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents ~ Seite For English ReadersFÜR Deutsche Leser Seite Pour LES Lecteurs FrancaisQuesto Prodotto E’ Conforme AL D.M /08/95 NBefore Using EnglishConnections FeaturesConnecting the audio components Precaution when using S-jacks Connecting video componentsConnecting a video component equipped with S-Video jacks Connecting the antenna terminals AM loop antenna assembly FM antenna adopter assemblyConnecting the speaker cords Connecting the external input EXT. in jacksConnecting the Multi Zone jacks Speaker system connectionsConnections Part Names and FunctionsFront Panel Surround Speaker A/BSystem Setup button Setting UP the SystemRemote control unit Cursor buttonsSetting the type of speakers Before setting up the systemSetting the power amplifier assignment Speaker system layout Basic system layoutSetting the Crossover Frequency and Subwoofer mode ParametersSetting the delay time Setting the SB CH Auto Flag DetectSetting the channel level Setting the Digital In Assignment Setting the on-screen display OSD Setting the multi vol. levelAuto tuner preset DB, -40 dBUsing the remote control unit Remote Control UnitAfter completing system setup On-screen display signalsPreset memory Operating Denon audio componentsSystem buttons Checking the preset memory settingsOperating a component stored in the preset memory ButtonsSystem call Storing system call signalsLearning function System call buttonsResetting Enter Resetting learned buttonsAll reset function Before operating OperationAuto search function ¢ON/STANDBYPlaying the input source Turning the sound off temporarily Muting Adjusting the sound quality ToneListening over headphones Multi-source recording/playback Playing one source while recording another REC OUT modeSet the recording mode SourceMulti-source and multi-zone playback Before playing with the surround function Dolby Surround Pro Logic II modeSurround Fader functionPanorama Control Surround parameters q Pro Logic II ModeDimension Control Center Width ControlCOMP. Dynamic Range Compression Afdm Auto Flag Detect ModeSurround parameters w Cinema EQ. Cinema Equalizer LFE Low Frequency EffectDSP surround simulation Surround modes and their featuresDSP Surround Simulation Personal Memory PlusTone control setting Bass 1TREBLEMusic Surround parameters eCinema Checking the preset stations Auto tuningManual tuning Listening to the RadioRDS Radio Data System Recalling preset stationsRDS search RT Radio Text PTY searchTP search TP SearchInitialization of the Microprocessor TroubleshootingLast Function Memory Surround back speakers Additional InformationOptimum surround sound for different sources When not using surround back speakers Speaker setting examplesWhen using different surround speakers for movies and music Dolby Digital compatible media and playback methods SurroundDolby Surround Dolby Digital Dolby Surround AC-3 Dolby Pro LogicDTS Digital Surround DTS-ES Extended Surround TMSurround modes and parameters Mono Stereo MonoStereo

AVR-1082 specifications

The Denon AVR-1082 is an advanced audio-video receiver that has made a significant mark in home theater systems. This reliable receiver is designed to provide an immersive audio-visual experience, making it a popular choice among audio enthusiasts and casual users alike.

One of the key features of the Denon AVR-1082 is its powerful amplification. Delivering a robust output of 7.1 channels, it supports various surround sound formats, including Dolby Digital EX and DTS-ES, which enhances the listening experience by providing multidimensional sound. The receiver is equipped with Denon's proprietary High Current Amplification, which ensures that the receiver can drive a wide range of speakers with ease, delivering clear and dynamic sound across all frequencies.

The AVR-1082 also features advanced video processing capabilities. It supports multiple video formats, including 4K pass-through, making it compatible with modern high-definition sources. With its onboard video scaling, the receiver enhances lower resolution content for better playback on high-definition displays. This technology ensures that users can enjoy their favorite movies and shows in the best available quality.

Another notable feature is the inclusion of various connectivity options. The Denon AVR-1082 comes with multiple HDMI inputs and outputs, allowing users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices effortlessly. Additionally, it supports Audio Return Channel (ARC), simplifying audio playback from the TV back to the receiver.

For convenience, the AVR-1082 also features Denon’s advanced setup assistant, which aids users in configuring the system easily. The automatic calibration technology optimizes speaker placement and listening positions, ensuring that users achieve the best sound quality without the need for extensive setup knowledge.

The built-in network capabilities of the Denon AVR-1082 allow for seamless streaming from popular services such as Spotify and Pandora. Users can also connect to their home Wi-Fi networks, enabling convenient access to digital libraries.

Overall, the Denon AVR-1082 is a feature-rich audio-video receiver that combines advanced technology with user-friendly features. Its powerful amplification, support for various formats, high-quality video processing, and extensive connectivity options make it an excellent choice for anyone looking to enhance their home theater experience.
Top Page Image Contents