07Initial Settings
Setting the AM tuning step
The AM tuning step can be switched between 9 kHz, the preset step, and 10 kHz. When using the tuner in North, Central or South America, reset the tuning step from 9 kHz (531 – 1,602 kHz allowable) to 10 kHz (530 – 1,640 kHz allow- able).
1 Press FUNCTION to select AM.
Press FUNCTION repeatedly until AM Step appears in the display.
2Select the AM tuning step with 2/3.
Pressing 2/3 will switch the AM tuning step between 9 kHz and 10 kHz. The selected AM tuning step will appear in the display. 
Switching the warning tone
If the front panel is not detached from the head unit within five seconds of turning off the igni- tion, a warning tone will sound. You can turn off this warning tone.
1Press FUNCTION to select WARN. Press FUNCTION repeatedly until Warning appears in the display.
2Select WARN on or off with 5/∞. Pressing 5/∞ will switch Warning between on and off and that status will be displayed (e.g.,
Warning :ON). 
Section
07
Switching the auxiliary setting
It is possible to use auxiliary equipment with | English | |
| ||
this unit. Activate the auxiliary setting when |
| |
using auxiliary equipment connected to this |
| |
unit. |
| |
1 Press FUNCTION to select AUX. |
| |
Press FUNCTION repeatedly until AUX appears | Español | |
in the display. | ||
| ||
2 Select AUX on or off with 5/∞. |
| |
Pressing 5/∞ will switch AUX between on and |
| |
off and that status will be displayed (e.g., |
| |
AUX :ON). |
| |
Switching the dimmer setting | Deutsch | |
| ||
To prevent the display from being too bright at |
| |
night, the display is automatically dimmed |
| |
when the car’s headlights are turned on. You |
| |
can switch dimmer on or off. | Français | |
Press FUNCTION repeatedly until Dimmer | ||
1 Press FUNCTION to select DIM. |
| |
appears in the display. |
|
2 Select DIM on or off with 5/∞.
Pressing 5/∞ will switch Dimmer between on | Italiano | |
and off and that status will be displayed (e.g., | ||
| ||
Dimmer :ON). |
|
Nederlands
En 31
