Section
Before You Start 01
Attaching the front panel
Replace the front panel by holding it upright to this unit and clipping it securely into the mounting hooks.
About the demo mode
This product features two demonstration | English | |
| ||
modes. one is the reverse mode, the other is the |
| |
feature demo mode. |
| |
Reverse mode |
| |
If you do not perform an operation within about | Español | |
Pressing 5 numbered button when power to this | ||
30 seconds, screen indications start to reverse, |
| |
and then continue reversing every 10 seconds. |
| |
product is switched off while the ignition switch |
| |
is set to ACC or ON cancels the reverse mode. |
| |
Pressing 5 numbered button again to start the |
| |
reverse mode. | Deutsch | |
Feature demo | ||
| ||
The feature demo automatically starts when |
| |
power to this product is switched off while the |
| |
ignition switch is set to ACC or ON. Pressing 6 |
| |
numbered button during feature demo opera- | Français | |
tion cancels the feature demo mode. Pressing 6 | ||
| ||
numbered button again to start the feature |
| |
mode. remember that if the feature demo con- |
| |
tinues operating when the car engine is |
| |
switched off, it may drain battery power. |
| |
Notes | Italiano | |
front panel is open. | ||
• You cannot cancel a demo mode when the |
| |
• The red lead (ACC) of this product should be |
| |
connected to a terminal coupled with ignition |
| |
switch on/off operations. If this is not done, |
| |
the vehicle battery may be drained. |
|
Nederlands
En 7