Denon AVR-1082 manual Before setting up the system, Setting the power amplifier assignment

Page 10

ENGLISH

NOTES:

•The on-screen display signals are not output from the color difference (component) video signal (MONITOR OUT) jacks.

•The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback of a video component. For example, if the TV monitor is connected to both the AVR-3802’s S-Video and video monitor output jacks and signals are input to the AVR-3802 from a video source (VDP, etc.) connected to both the S-Video and video input jacks, the on-screen display signals are output with priority to the S- Video monitor output. If you wish to output the signals to the video monitor output jack, do not connect a cord to the S-VIDEO MONITOR OUT jack. (For details, see page 16.)

•The AVR-3802’s on-screen display function is designed for use with high resolution monitor TVs, so it may be difficult to read small characters on TVs with small screens or low resolutions.

•The setup menu is not displayed when “HEADPHONE ONLY” is selected.

•Speaker system layout Basic system layout

•The following is an example of the basic layout for a system consisting of eight speaker systems and a television monitor:

Subwoofer

Center speaker system

Surround back speaker systems

Before setting up the system

1

Check that all the connections are correct, then turn on the main unit’s power.

2

SETUP

Display the System Setup Menu.

 

Setting the power amplifier assignment

Make this setting to switch the power amplifier for the surround back channel to Multi.

1

TUNING

 

At the System Setup Menu, select “Power Amp

 

ENTER

Assignment” and press the ENTER button.

 

BAND

MODE

 

 

 

SHIFT

 

TUNING

Front speaker systems

2

TUNING

BAND

MODE

 

TUNING

Select “Surround Back” to use as the surround back channel, “Multi” to use as multi zone out.

When “Surround Back” is selected

When “Multi” is selected

Set these at the sides of the TV or

screen with their front surfaces as flush Surround speaker systems with the front of the screen as possible.

With the AVR-3802 it is also possible to use the surround speaker selector function to choose the best layout for a variety of sources and surround modes.

•Surround speaker selector function

This function makes it possible to achieve the optimum sound fields for different sources by switching between two systems of surround speakers (A and B).

3

ENTER

Enter the setting.

 

The System Setup Menu reappears.

SHIFT

 

Setting the type of speakers

•The composition of the signals output from the different channels and the frequency response are adjusted automatically according to the combination of speakers actually being used.

A

 

 

A

B

SB

SB

B

 

 

Using A only

A

 

 

A

B

SB

SB

B

 

 

Using B only

SB: SURROUND BACK SPEAKER

1

TUNING

At the System Setup Menu select “Speaker Configuration”.

 

BAND

MODE

 

TUNING

 

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents ~ Seite For English ReadersFÜR Deutsche Leser Seite Pour LES Lecteurs FrancaisQuesto Prodotto E’ Conforme AL D.M /08/95 NBefore Using EnglishConnecting the audio components FeaturesConnections Connecting a video component equipped with S-Video jacks Connecting video componentsPrecaution when using S-jacks Connecting the antenna terminals AM loop antenna assembly FM antenna adopter assemblyConnecting the speaker cords Connecting the external input EXT. in jacksConnecting the Multi Zone jacks Speaker system connectionsConnections Part Names and FunctionsFront Panel Surround Speaker A/BSystem Setup button Setting UP the SystemRemote control unit Cursor buttonsSetting the type of speakers Before setting up the systemSetting the power amplifier assignment Speaker system layout Basic system layoutSetting the Crossover Frequency and Subwoofer mode ParametersSetting the delay time Setting the SB CH Auto Flag DetectSetting the channel level Setting the Digital In Assignment Setting the on-screen display OSD Setting the multi vol. levelAuto tuner preset DB, -40 dBUsing the remote control unit Remote Control UnitAfter completing system setup On-screen display signalsPreset memory Operating Denon audio componentsSystem buttons Checking the preset memory settingsOperating a component stored in the preset memory ButtonsSystem call Storing system call signalsLearning function System call buttonsResetting All reset function Resetting learned buttonsEnter Before operating OperationAuto search function ¢ON/STANDBYPlaying the input source Listening over headphones Adjusting the sound quality ToneTurning the sound off temporarily Muting Multi-source recording/playback Playing one source while recording another REC OUT modeSet the recording mode SourceMulti-source and multi-zone playback Before playing with the surround function Dolby Surround Pro Logic II modeSurround Fader functionPanorama Control Surround parameters q Pro Logic II ModeDimension Control Center Width ControlCOMP. Dynamic Range Compression Afdm Auto Flag Detect ModeSurround parameters w Cinema EQ. Cinema Equalizer LFE Low Frequency EffectDSP surround simulation Surround modes and their featuresDSP Surround Simulation Personal Memory PlusTone control setting Bass 1TREBLECinema Surround parameters eMusic Checking the preset stations Auto tuningManual tuning Listening to the RadioRDS search Recalling preset stationsRDS Radio Data System RT Radio Text PTY searchTP search TP SearchLast Function Memory TroubleshootingInitialization of the Microprocessor Optimum surround sound for different sources Additional InformationSurround back speakers When using different surround speakers for movies and music Speaker setting examplesWhen not using surround back speakers Dolby Digital compatible media and playback methods SurroundDolby Surround Dolby Digital Dolby Surround AC-3 Dolby Pro LogicDTS Digital Surround DTS-ES Extended Surround TMSurround modes and parameters Stereo MonoMono Stereo

AVR-1082 specifications

The Denon AVR-1082 is an advanced audio-video receiver that has made a significant mark in home theater systems. This reliable receiver is designed to provide an immersive audio-visual experience, making it a popular choice among audio enthusiasts and casual users alike.

One of the key features of the Denon AVR-1082 is its powerful amplification. Delivering a robust output of 7.1 channels, it supports various surround sound formats, including Dolby Digital EX and DTS-ES, which enhances the listening experience by providing multidimensional sound. The receiver is equipped with Denon's proprietary High Current Amplification, which ensures that the receiver can drive a wide range of speakers with ease, delivering clear and dynamic sound across all frequencies.

The AVR-1082 also features advanced video processing capabilities. It supports multiple video formats, including 4K pass-through, making it compatible with modern high-definition sources. With its onboard video scaling, the receiver enhances lower resolution content for better playback on high-definition displays. This technology ensures that users can enjoy their favorite movies and shows in the best available quality.

Another notable feature is the inclusion of various connectivity options. The Denon AVR-1082 comes with multiple HDMI inputs and outputs, allowing users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices effortlessly. Additionally, it supports Audio Return Channel (ARC), simplifying audio playback from the TV back to the receiver.

For convenience, the AVR-1082 also features Denon’s advanced setup assistant, which aids users in configuring the system easily. The automatic calibration technology optimizes speaker placement and listening positions, ensuring that users achieve the best sound quality without the need for extensive setup knowledge.

The built-in network capabilities of the Denon AVR-1082 allow for seamless streaming from popular services such as Spotify and Pandora. Users can also connect to their home Wi-Fi networks, enabling convenient access to digital libraries.

Overall, the Denon AVR-1082 is a feature-rich audio-video receiver that combines advanced technology with user-friendly features. Its powerful amplification, support for various formats, high-quality video processing, and extensive connectivity options make it an excellent choice for anyone looking to enhance their home theater experience.
Top Page Image Contents