![](/images/new-backgrounds/1033295/3329543x1.webp)
ENGLISH
Auto search function
•The set is equipped with a function for searching for the registration number if you do not know the preset code (a
9OPERATION
Before operating
1 | For TV, DBS or CABLE components, turn on the | ||
component’s power. For CD, MD, TAPE, DVD, | |||
| VCR and VDP component’s, turn on the | ||
| component’s power and load a disc or tape. | ||
2 | Press the power ON/SOURCE button and the | ||
OFF button simultaneously. | |||
| • “SET UP” appears on the remote control | ||
| unit’s display. |
| |
| OFF | ON / | |
| SOURCE | ||
|
|
| |
3 | ENTER | Press the ENTER button. | |
|
| ||
SHIFT |
| ||
4 | Use | the D and H cursor buttons to display | |
“AUTOSEARCH” on the remote control unit, | |||
| then press the ENTER button. | ||
|
| TUNING |
|
|
|
| ENTER |
| BAND | MODE |
|
|
|
| SHIFT |
|
|
|
|
| POWER |
2 | OFF |
|
|
| ON / |
|
|
| SOURCE | ||
|
|
|
| ||
6 | REMOTE CONTROL UNIT | ||||
|
|
|
|
| |
| TV | CD | CDR/MD/ TAPE RECEIVER | ||
| VCR DBS/CABLE | VDP | DVD | ||
| DISPLAY |
|
| MENU | |
| SURR. |
|
|
| OSD |
| PARA. |
|
|
| |
| SETUP |
|
|
| RETURN |
4, 5 |
|
| TUNING |
| A/B |
|
|
|
| MEMORY | |
BAND |
| MODE | |||
| CHANNEL |
|
|
| VOLUME |
| + |
| TUNING |
| + |
3, 4, 5, 7 |
|
|
| ||
SKIP |
| ENTER |
| ||
- |
| SHIFT |
| - | |
| SKIP |
| MUTING |
| |
| TUNER |
| PHONO |
| CD |
| 1 |
| 2 |
| 3 |
| CDR/TAPE |
| VDP |
| DVD |
| 4 |
| 5 |
| 6 |
| TV/DBS | ||||
| 7 |
| 8 |
| 9 |
| TV/ |
| 0 |
| +10 |
| VCR |
|
| ||
| RDS |
| PTY |
| RT |
| TEST |
| SPEAKER | OUTPUT | |
| TONE |
| |||
|
| SURROUND |
| ||
|
|
| DSP |
| 5CH / 7CH |
|
|
| SIMU. |
| STEREO |
| 6.1 / 7.1 |
| DIRECT |
| STEREO |
|
|
| INPUT |
|
|
| MODE |
| ANALOG |
| EXT.IN |
| SYSTEM CALL |
|
| ||
| CALL 1 |
| CALL 2 |
| BACKLIGHT |
1 | Refer to “CONNECTIONS” (pages 4 to 8) and |
check that all connections are correct. | |
2 | Select “AMP” using the RECEIVER button. |
(only when operating with the remote control | |
| unit) |
| RECEIVER |
| (Remote control unit) |
3 | Turn on the power. |
Press the POWER operation switch (button). |
¢ON / STANDBY
ON /
SOURCEON/STANDBY
Lights
£OFF
(Main unit) | (Remote control unit) |
• ¢ON/STANDBY |
The power turns on and “ON/STANDBY” |
indicator is light. |
Several seconds are required from the time |
the power operation switch is set to the “¢ |
B
3
POWER
OFF |
|
|
| ON / | 3 | |
|
| SOURCE | ||||
|
|
|
| |||
| REMOTE CONTROL UNIT |
| ||||
TV | CD | CDR/MD/ TAPE RECEIVER | 2 | |||
VCR | DBS/CABLE | VDP | DVD | |||
| ||||||
| DISPLAY |
| MENU |
|
TUNING
ON/STANDBY” position until sound is output. |
This is due to the |
prevents noise when the power switch is |
turned on and off. |
5 | Use the D and H cursor buttons to display the |
mode of the component to be searched for on | |
| the remote control unit’s display, then press the |
| ENTER button. |
| • The registration codes are transmitted in |
order. |
|
TUNING |
|
| ENTER |
BAND | MODE |
| SHIFT |
TUNING |
|
When the component operates,
6 | OFF | press the POWER OFF button. | |
| |||
|
| • | The mode and the registered |
|
|
| number appear on the remote |
|
|
| control unit’s display. |
| The channel switches on the TV, DBS or CABLE | ||
| device and playback stops on a CD, MD, tape, | ||
| DVD, VCR or VDP player. | ||
7 | ENTER | Press the ENTER button. | |
| • | “COMPLETE” is displayed on the | |
SHIFT |
| remote control unit’s display and the |
selected code is preset.
If you press the power OFF button late at step 6, press the D and H cursor button once to move to the next code or back to the previous code one step at a time.
Dbutton: Next code
Hbutton: Previous code
Auto search resumes when you move ahead from the code at which you stopped.
Set the power operation switch to this |
position to turn the power on and off from the |
included remote control unit |
• £OFF |
The power turns off and “ON/STANDBY” |
indicator is off. |
In this position, the power cannot be turned |
on and off from the remote control unit (RC- |
884). |
22