Carrier Miracool owner manual Methods for Cleaning Stainless Steel

TABLE 4 –METHODS FOR CLEANING STAINLESS STEEL

TASK	CLEANING AGENT*	METHOD OF APPLICATION				EFFECT ON FINISH
Routine Cleaning	Soap, ammonia or detergent	Sponge with cloth, then rinse				Satisfactory for use on all
	and water	with clear water and wipe dry.				finishes.
Stubborn Spots and Stains,	Revere Ware, Goddard’s,	Apply with a damp sponge or				Satisfactory for use on all
Caked-on Splatter, and other	Twinkle or Cameo stainless	cloth. Rub with a damp cloth.				finishes if rubbing is light. Use
Light Discolorations	steel cleaner or Soft Scrub					in direction of polish lines.
	cleaner.
	Household cleansers, such as	Rub with a damp cloth. May				Use in direction of polish lines.
	Old Dutch, Bon Ami, Ajax,	contain chlorine bleachers.				May scratch or dull highly
	Comet.	Rinse thoroughly after use.				polished finishes.
Heat Ting or Heavy	Revere Ware, Goddard’s,	Apply with damp sponge or				Use in direction of polish lines.
Discoloration	Twinkle or Cameo stainless	cloth.				May scratch or dull highly
	steel cleaner.					polished finishes.
Caked-on Foods and Grease,	Easy-Off oven cleaner.	Apply generous coating. Allow				Excellent removal. Satisfactory
Fatty Acids Milkstone (where		to stand for 10 to 15 minutes.				for use on all finishes.
swabbing or rubbing is not		Rinse. Repeated application
practical)		may be necessary.
Hard Water Spots and Scale	Vinegar.	Swab or wipe with cloth. Rinse				Satisfactory for use on all
		with water and dry.			￿	finishes.
*Use of brand names is intended only to indicate a type of		NOTES:
cleaner and does not constitute an endorsement; nor does the		1. Use the mildest cleaning procedure that will do the job
omission of any brand name cleaner imply its inadequacy.			efficiently and effectively.
Many products named are regional in distribution and can be		2. Always rub in the direction of the polish lines for
found in local supermarkets, department and hardware stores.			maximum effectiveness and to avoid marring the surface.
All products should be used	in strict accordance with	3.	Use only a soft cloth, sponge, fiberous brushes, plastic or
			stainless steel pads for cleaning and scouring.
instructions on package.
		4. Rinse thoroughly		with fresh water after every cleaning
￿
			operation.
		5.	Always wipe dry to avoid water marks.
		6. Never use common steel wood pads; these will cause
			rust.

13