Sennheiser EK 500 G2 Using the receiver, Switching the receiver on/off, Connecting the headphones

Page 14

Using the receiver

Switching the receiver on/off

The receiver can only be switched off when the standard display is shown on the display panel. When in the operating menu, briefly pressing the ON/OFF button will cancel your entry (ESC function) and return you to the standard display with the last stored settings.

Note:

Remove the batteries orthe accupack whenthe receiver will not be used forextended periods of time.

Press the two unlocking buttons	and open the
battery compartment cover .

Press the ON/OFF button	to switch the receiver on.
The red LED lights up.

To switch the receiver off, press the ON/OFF button until “OFF” appears on the display. The red LED goes off.

Close the battery compartment. The battery compartment cover locks into place with an audible click.

Connecting the headphones

To monitor theaudiosignal, connect headphones with a 3.5mmjack plug to theheadphoneoutput (PHONES) .

Image 14

Contents Instructions for use Thank you for choosing Sennheiser Contents EK 500 G2 receiver Channel bank systemSafety instructions Areas of application Delivery includesOperating controls LC display panel Operation and battery status indicationIndications and displays Indications and displays of the receiverDisplay backlighting RF signal indicationPilot display Modulation display Remote displays of an ew 500 G2 transmitterMute display Inserting and charging the accupack Preparing the receiver for useInserting and replacing the batteries Connecting units to the audio output Mounting the receiver to a cameraAttaching the receiver to clothing Connecting the headphones Using the receiverSwitching the receiver on/off Activating/deactivating the lock mode Volume up? noOperating menu ButtonsGetting into the operating menu Overview of menusWorking with the operating menu Selecting a menuExiting the operating menu Adjusting a settingStoring a setting Exit Operating menu of the receiverFreq Name Switching between the channels ina channel bank Chan Adjustment tips for the operating menuSwitching between channel banks Bank Starting the scan and storing the scan result Scanning the channel banks for free channels ScanMulti-channel operation Releasing locked channelsImportant notes Adjusting the audio output level- AF OUTAdjusting the squelch threshold- Sqelch Entering a name Name Loading the factory-preset default settings ResetSelecting the standard display Dislpy Exiting the operating menu Exit Activating/deactivating the lock mode LockActivating/deactivating the pilot tone evaluation- Pilot Troubleshooting Error checklistFor optimum reception Care and maintenanceRecommendations and tips For multi-channel operationHDX noise reduction Wireless transmission systemsAdditional information Field strength-dependent squelch SquelchPilot tone squelch Specifications 2015 AccessoriesConnector assignment CE Declaration of Conformity Warranty regulationsManufacturer declarations Batteries or rechargeable batteries