Sennheiser EK 500 G2 Adjustment tips for the operating menu, Switching between channel banks Bank

Adjustment tips for the operating menu

Switching between channel banks – BANK

Via the “BANK” menu, you can switch between the receiver’s nine channel banks. Each of the channel banks “1” to “8” has up to 20 switchable channels that are factory-preset to a receiving frequency (see “The channel bank system” on page 4). The channel bank “U” (user bank) has up to 20 switchable channels to store your selection out of 1440 receiving frequencies that are freely selectable within the preset frequency range.

When switching from one channel bank to another, the channel with the lowest channel number is automatically displayed. If, during the last scan of this channel bank, an interfering frequency was detectedonthe channelwiththe lowest channel number (see “Scanning the channel banks for free channels” on page22), the receiver display panel automatically displays the next free channel.

Switching between the channels ina channel bank – CHAN

Via the “CHAN”menu, you canswitchbetweenthe different channels in a channel bank. When switching between the channels, please observe the following:

y Always set the transmitter and the receiver of a transmission link to the same channel.

y After scanning the channel banks (see “Scanning the channel banks for free channels” on page22), only the free channels can be chosen on the receiver. Set the transmitter and the receiverto one of the free channels.

Selecting the frequencies to be stored in the channel bank “U” – TUNE

Via the “TUNE” menu, you can select the frequencies to be stored in the channel bank “U” (user bank).

When you have selected one of the channel banks “1” to “8” and then select the “TUNE” menu, the receiver automatically switches to channel 01 of the channel bank “U”. In this case, “U.01” briefly appears on the display.

21