Sennheiser EK 500 G2 manual Indications and displays, LC display panel

Page 8

Indications and displays

LC display panel

Alphanumeric display

“B.CH“ – appears when the channel bank and the channel number are displayed

“MHz“ – appears when the frequency is displayed

4-step battery status display

Lock mode icon

(lock mode is activated)

“PILOT”display

(pilot tone evaluation is activated)

“MUTE” display

(audio output is muted)

7-step level display for received audio signal“AF”

7-step level display for received RF signal “RF”

Indications and displays of the receiver

When used together with an ew 500 G2 transmitter, the receiver provides information on its operating states and those of the received transmitter (remote displays).

Operation and battery status indication

The red LED (LOW BAT/ON) provides information on the current operatingstate of the receiver:

Red LED lit up:

The receiver is switched on and the

 

capacity of the

batteries/BA 2015

 

accupack is sufficient.

Red LED flashing:

The batteries

are/the BA 2015

 

accupack is going flat (LOW BAT)!

8

Image 8
Contents Instructions for use Thank you for choosing Sennheiser Contents EK 500 G2 receiver Channel bank systemSafety instructions Areas of application Delivery includesOperating controls Operation and battery status indication Indications and displaysLC display panel Indications and displays of the receiverDisplay backlighting RF signal indicationPilot display Modulation display Remote displays of an ew 500 G2 transmitterMute display Inserting and charging the accupack Preparing the receiver for useInserting and replacing the batteries Connecting units to the audio output Mounting the receiver to a cameraAttaching the receiver to clothing Connecting the headphones Using the receiverSwitching the receiver on/off Activating/deactivating the lock mode Volume up? noOperating menu ButtonsOverview of menus Working with the operating menuGetting into the operating menu Selecting a menuExiting the operating menu Adjusting a settingStoring a setting Exit Operating menu of the receiverFreq Name Switching between the channels ina channel bank Chan Adjustment tips for the operating menuSwitching between channel banks Bank Scanning the channel banks for free channels Scan Multi-channel operationStarting the scan and storing the scan result Releasing locked channelsImportant notes Adjusting the audio output level- AF OUTAdjusting the squelch threshold- Sqelch Entering a name Name Loading the factory-preset default settings ResetSelecting the standard display Dislpy Exiting the operating menu Exit Activating/deactivating the lock mode LockActivating/deactivating the pilot tone evaluation- Pilot Troubleshooting Error checklistCare and maintenance Recommendations and tipsFor optimum reception For multi-channel operationHDX noise reduction Wireless transmission systemsAdditional information Field strength-dependent squelch SquelchPilot tone squelch Specifications 2015 AccessoriesConnector assignment Warranty regulations Manufacturer declarationsCE Declaration of Conformity Batteries or rechargeable batteries