O P E R AT I N G I N S T RU C T I O N S
SETTING THE CONTROLS
SETTING THE POWER LEVEL
The power level for the selected Cooking Zone can be set from 
to 
and 
(Boost).
To adjust the power level:
1Touch the 
or 
pad for the selected Cooking Zone.
Touching 
will set the power level to 
. Touching 
will set the power level to 
.
Touch the 
or 
pad of the selected Cooking Zone to increase or decrease the power level.
If power level 
is selected, the Cooking Zone will turn off after 5 seconds.
2For faster power level adjustments, touch and hold the 
or 
pads until the desired setting is reached.
NOTE: Normal power
settings range in 1/2 step increments for power levels from 2 to 6 to allow precision cooking. A dot will appear next to the number to indicate a 1/2 power level step.
3If the Cooking Zone 
or 
pads are held for more 10 seconds, the timer display will show the error message 
. To clear this error message, press the ON/OFF pad for the Cooking Zone you were setting. This message does NOT relate to the timer pad.
To turn off the cooking zone:
1Once cooking is complete, touch the ON/OFF pad to turn the cooking zone OFF.
2The corresponding cooking zone display witll turn off.
3If the POWER pad is touched instead of ON/OFF, the entire cooktop will turn off.
ENGLISH
NOTE:
•If the cookware or pan is moved from the center of any active Cooking Zone for any reason, a sensor will detect this and the Cooking Zone will no longer heat. The display for that Cooking Zone will flash the last power level setting for the Cooking Zone.
•The Cooking Zone will remember the power level setting for up to 90 seconds before the Cooking Zone will automatically shut off.
WARNING
Your cooktop has a residual heat indicator 
for each Cooking Zone. This indicator will warn that this area has been used and is still giving off enough heat to cause burns.
Avoid touching the burner when this indicator is shown. Although the cooktop is OFF, the 
will stay lit until the cooktop has cooled down.
15