LG Electronics HN7413AG, LCE30845 installation instructions Cooktop Installation

Page 25

I N S TA L L AT I O N I N S T RU C T I O N S

ELECTRICAL CONNECTIONS (cont.)

IF COOKTOP IS USED IN A NEW BRANCH CIRCUIT INSTALLATION (1996 NEC), MOBILE HOME, RECREATIONAL VEHICLE, OR WHERE LOCAL CODES DO NOT PERMIT GROUNDING TO THE NEUTRAL (WHITE) WIRE

ENGLISH

Observe all governing codes and local ordinances.

1Disconnect the power supply.

2At the circuit breaker box, fuse box or junction box, connect appliance and power supply cable wires as shown.

WARNING

If connecting to a 4-wire power supply cable electrical system, the appliance frame connected ground wire MUST NOT be connected to the neutral wire of the 4-wire electrical system.

4-WIRE GROUNDED JUNCTION BOX

Cable from power supply

White wire

Ground(no connection) wire

Red
wires	Black
	wires

Junction box

UL-listed conduit

Green wire (ground)	connector
	connector
	Cable from cooktop

COOKTOP INSTALLATION

1Visually inspect the cooktop for damage. Make sure all cooktop screws are tight (see below for locations).

Screws

WARNING

Do not remove the nylon spacers on the edges of the cooktop. These spacers center the cooktop in the space provided. The cooktop must be centered to allow proper venting and to prevent excess heat buildup that may result in heat damage or fire.

2Carefully lower the cooktop into the counter- top cutout, making sure not to trap any wires.

NOTE: Do not use caulking compound. The cooktop must be removable, should service be required.

Nylon spacers

25

Image 25

Contents CERAMIC-GLASS Induction Cooktop DE Vidrio CerámicoThank YOU T RO D U C T I O NImportant Notice Radio Interference Read ALL Instructions Before USEP O RTA N T S a F E T Y I N F O R M AT I O N Safety PrecautionsNever use your appliance for warming or heating a room Electrical Safety Safety PrecautionsChild Safety Safety During USE Safety When Cleaning Safety During USECook Meat and Poultry Thoroughly Disposal of OLD Appliances HOW to Avoid Damage to the ApplianceSelecting Cookware Induction CookingHOW Induction Cooking Works Pots and PansAvoiding Scratches Selecting CookwareUSE FLAT-BOTTOMED Cookware For Best ResultsSelecting the Proper PAN Size Cookware Selection and PlacementCorrect PA RT S a N D F E AT U R E S Parts and Features of Your CooktopCooking Zone Controls Each Cooking Touch Control FeaturesSetting the Controls Before Using the CooktopE R AT I N G I N S T RU C T I O N S To adjust the power level Setting the Power LevelTo turn off the cooking zone Power Boost Setting the ControlsActivating Power Boost Power Level GuideUsing the Timer Using the Bridge Cooking ZonesOther Functions Using Child LockGeneral Cleaning Cleaning the CooktopProblem Soils Removing Heavy SoilS TA L L AT I O N I N S T RU C T I O N S Technical SpecificationsBefore YOU Begin Unpacking the CooktopImportant Installation Information Preparing the Installation LocationSurface Dimensions and ClearancesElectrical Connections Important Safety InstructionsProviding Electrical Connection Electrical RequirementsElectrical ground is required on this appliance Electrical ConnectionsElectrocution or other serious personal injury Cooktop Installation Preferred installation Alternative installation Cooktop InstallationFinal Check Model and Serial Number LocationProblem Possible Causes Solutions Before Calling for ServiceDisplay RO U B L E S H O OT I N GTo Contact LG Electronics by Mail For any labor or in-home service OT E S

Related manuals

Manual 48 pages 47.78 Kb