LG Electronics LRE30755S, LRE30451S Before YOU Begin, Important Safety Instructions

Page 2

Part 1

SAFETY

1BEFORE YOU BEGIN

Remove all tape and packing materials before using the range. Dispose all plastic bags after unpacking the range. Never allow children to play with packing materials.

IMPORTANT SAFETY INSTRUCTIONS

WARNING If the information in this manual is not followed exactly, a fire or electrical shock may result causing property damage, personal injury or death.

WARNING

• ALL RANGES CAN TIP

INJURY TO PERSONS COULD RESULT

INSTALL ANTI-TIP BRACKET

PACKED WITH RANGE

• SEE INSTALLATION INSTRUCTIONS

Important Notes to the Installer

Read all instructions contained in these installation instructions before installing range.

Remove all packing materials from the oven compartments before connecting the electrical supply to the range.

Observe all governing codes and ordinances.

Be sure to leave these instructions with the consumer.

Important Note to the Consumer

Keep these instructions with your owner’s manual for future reference.

As when using any appliance generating heat, there are certain safety precautions you should follow.

Be sure your range is installed and grounded properly by a qualified installer or service technician.

Make sure the wall coverings around the range can withstand the heat generated by the range.

To eliminate the need to reach over the surface elements, cabinet storage space above the elements should be avoided.

PREPARE TO INSTALL THE RANGE

TOOLS NEEDED

PARTS PROVIDED

PARTS NOT PROVIDED

2

Image 2
Contents Installation Manual Before YOU Begin Important Safety InstructionsImportant Notes to the Installer Important Note to the ConsumerClearances and Dimensions Figure Part 2 Prepare to Install the RangeInstallation Drawings Minimum Dimensions FigureElectrical Connection Requirements Specified power-supply-cord kit ratingPart 3 Electrical Connections Connect Range CordYou must install the power cord with a strain relief Wire connection with a power supply cordInstall the power cord as follows Do not remove the ground strap connectionWire Wire connection conduitInstall the conduit as follows Reinstall Conduit connection plate Final Installation Part 4 Install the RangeANTI-TIP Device Installation Locate the bracket using the templateManual de instalación Notas importantes para el instalador Antes DE ComenzarInstrucciones DE Seguridad MUY Importantes Notas importantes para el consumidorSección 2 Preparativos Para Instalar LA Estufa Holguras Y Dimensiones FiguraDimensiones Mínimas Figura Ilustraciones DE InstalaciónCómo Conectar EL Cable DE LA Estufa Sección 3 Conexiones EléctricasRequisitos DE LAS Conexiones Eléctricas Conexión de 4 alambres Con un cable de alimentación Conexión de 3 alambres Con un cable de alimentaciónInstale el cable de alimentación como sigue No quite la conexión de la cinta de conexión a tierraAlambres Conexión de 3 alambres Conducto portacablesInstale el conducto portacables de la manera siguiente Conexión de 4 alambres Conducto portacables Instalación Final Sección 4 Cómo Instalar LA EstufaInstalación DEL Dispositivo ANTI-VOLCADURAS
Related manuals
Manual 11 pages 23.32 Kb