Roper FGP335B warranty Lift-up cooktop, Surface burners, Replace surface burner grates

Page 17

Lift-up cooktop

1.Remove surface burner grates.

2.Lift front of cooktop at both front corners until the support rods lock into place.

Personal Injury Hazard

Be sure both support rods are fully extended and in the locked position.

Failure to do so could result in per- sonal injury from the cooktop acciden- tally falling.

Product Damage Hazard

Do not drop the cooktop.

Damage couM result to the porcelain and the cooktop frame.

3.Wipe with warm, soapy water. Use a soapy steel-wool pad on heavily soiled areas.

4.To lower the cooktop, lift ccoktop from both sides while pressing the support rods back to unlock them. Lower the cooktop into place.

Replace surface burner grates.

Surface burners

1.Lift up the cooktop, following the instructions above.

2.Before cleaning, remove screws that hold each of the burners in place. The screws prevent the burners from moving during shipment. Remove the shipping screw with a Phillips screwdriver, lift the burner up, tilt it to one side at the end closest to the ignitor and move it toward the back of the range. This separates the burner from the gas valve at the front of the range, so it can be easily removed.

3.Wipe off surface burners with warm, soapy water and a sponge after each use. To remove cooked-on food, soak the burners in a vinegar and water solution for 20-30 minutes. Scrub with a plastic scrubbing pad.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents UseAndCare Thank you for buying a Roper@ appliance Your safety is important to usRead and Save These Instructions Important safety InstructionsWhen using the cooktop Read and Save These Instructions Par& And Features Burners UsingYour Range Cookware tips Case of a prolonged power failurePans Positioning racksHome canning information FoodExtra oven rack position roasting rack For best air circulationFor proper roasting, follow these guidelines Two pansUsing the Minute Timer Setting the clockBaking/roasting Control Adjusting the oven temperatureBroiling Energy saving tips Anti-tip brackets Oven ventTo verify the anti-tip brackets are engaged Burn HazardBurn, Electrical Shock, Fire Explosion Hazard Caring For Your RangeSurface burner grates Replace surface burner grates Lift-up cooktopSurface burners +c. =.c.0scre Removing the oven doorTo remove To replaceRemoving the oven bottom HOW to Clean Cleaning ChartControl knobs Sponge and warm For cookedon foodPart What to USE Electrical Shock and Burn Hazard Oven lightTo replace the oven light Problem Possible Cause If You Need Assistance Or ServiceBurner fails to The power cord is not SolutionDisplay is flashing 12OO Ellow, or are noisy when turned offControl knobs Mill not turn If you are not satisfied with how the problem was solved If you need serviceIf you need assistance If you need FSP@ replace- ment partsLength of Warranty WE will PAY for Full ONE-YEAR Gas Range WarrantyWarranm WE will not PAY for
Top Page Image Contents