Roper FGP335B warranty Baking/roasting

Page 12

Baking/roasting

NOTE: Do not attempt to light the oven burner during a power failure. See “Important Safety Instructions” on page 4 for more information.

1.Position the rack(s) properly before turning on the oven. To change rack position, lift rack at front and pull out. For further information, see “Positioning racks and pans” on page 9.

2.Push in and turn the Oven Temperature Control counterclockwise to the baking/ roasting temperature you want. The oven burner will automatically light in 50-60 seconds.

3.When baklng, preheat the oven for 10 minutes. Put food in the oven.

NOTES:

Do not preheat when roasting or cooking items such as casseroles.

Do not place food directly on the oven bottom.

4.During baking/roasting, the oven burner will turn on and off to maintain the tem- perature setting.

5.When baking/roasting is done, turn the Oven Temperature Control clockwise to OFF.

Image 12

Contents UseAndCare Your safety is important to us Thank you for buying a Roper@ applianceImportant safety Instructions Read and Save These InstructionsWhen using the cooktop Read and Save These Instructions Par& And Features Using Your RangeBurners Case of a prolonged power failure Cookware tipsPositioning racks PansHome canning information FoodFor best air circulation Extra oven rack position roasting rackFor proper roasting, follow these guidelines Two pansSetting the clock Using the Minute TimerBaking/roasting Adjusting the oven temperature BroilingControl Energy saving tips Oven vent Anti-tip bracketsTo verify the anti-tip brackets are engaged Burn HazardCaring For Your Range Surface burner gratesBurn, Electrical Shock, Fire Explosion Hazard Lift-up cooktop Surface burnersReplace surface burner grates Removing the oven door +c. =.c.0screTo remove To replaceRemoving the oven bottom Cleaning Chart HOW to CleanControl knobs Sponge and warm For cookedon foodPart What to USE Oven light To replace the oven lightElectrical Shock and Burn Hazard If You Need Assistance Or Service Problem Possible CauseBurner fails to The power cord is not SolutionEllow, or are noisy when turned off Control knobs Mill not turnDisplay is flashing 12OO If you need service If you are not satisfied with how the problem was solvedIf you need assistance If you need FSP@ replace- ment partsGas Range Warranty Length of Warranty WE will PAY for Full ONE-YEARWarranm WE will not PAY for