Roper FGP335B warranty If You Need Assistance Or Service, Before calling for assistance, Solution

Page 23

If You Need Assistance

Or Service

This section is designed to help you save the cost of a service call. Part 1 of this section outlines possible problems, their causes, and actions you can take to solve each problem. Parts 2 and 3 tell you what to do if you still need assistance or service. When calling our toll- free telephone number for help or calling for service, please provide a detailed description of the problem, your appliance’s complete model and serial numbers and the purchase date. (See page 2.) This information will help us respond properly to your request.

1. Before calling for assistance . . .

Performance problems often result from little things you can find and fix without tools of any kind. Please check the chart below for problems you can fix. It could save you the cost of a service call.

PROBLEM POSSIBLE CAUSE

Nothing will The power cord is not

operate plugged into a live circuit with proper vottage.

Range is not properly con- netted to gas supply.

A household fuse has blown or a circuit breaker has tripped.

Controls are not set correctly.

The flow of combustion and/ or ventilation air to the range is blocked.

The oven will The Oven Temperature

not operate Control is not turned to a temperature setting.

Burner fails to The power cord is not

lightplugged into a live circuit with proper voltage.

A household fuse has blown or a circuit breaker has tripped.

Burner ports are clogged.

Burner flames Burner ports are clogged. are uneven

SOLUTION

Plug the power cord into a live circuit with proper voltage. (See Installation Instructions.)

Contact an authorized Roper service technician to reconnect range to gas supply. (See Installation Instruc- tions.)

Replace household fuse or reset circuit breaker.

Reset controls, if needed.

Remove blockage to airflow to and around range.

Push in and turn the Oven Temperature Control to a temperature setting.

Plug the power cord into a live circuit with proper voltage. (See Installation Instructions.)

Replace household fuse or reset circuit breaker. In case of prolonged power failure, manually light burners (see we 8).

Clean with a straight pin (see pages 18 and 20).

Clean with a straight pin (see pages 18 and 20). If this fails, call an authorized Roper service technician for service.

continued on next page

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents UseAndCare Thank you for buying a Roper@ appliance Your safety is important to usRead and Save These Instructions Important safety InstructionsWhen using the cooktop Read and Save These Instructions Par& And Features Burners UsingYour Range Cookware tips Case of a prolonged power failureFood Positioning racksPans Home canning informationTwo pans For best air circulationExtra oven rack position roasting rack For proper roasting, follow these guidelinesUsing the Minute Timer Setting the clockBaking/roasting Control Adjusting the oven temperatureBroiling Energy saving tips Burn Hazard Oven ventAnti-tip brackets To verify the anti-tip brackets are engagedBurn, Electrical Shock, Fire Explosion Hazard Caring For Your RangeSurface burner grates Replace surface burner grates Lift-up cooktopSurface burners To replace Removing the oven door+c. =.c.0scre To removeRemoving the oven bottom For cookedon food Cleaning ChartHOW to Clean Control knobs Sponge and warmPart What to USE Electrical Shock and Burn Hazard Oven lightTo replace the oven light Solution If You Need Assistance Or ServiceProblem Possible Cause Burner fails to The power cord is notDisplay is flashing 12OO Ellow, or are noisy when turned offControl knobs Mill not turn If you need FSP@ replace- ment parts If you need serviceIf you are not satisfied with how the problem was solved If you need assistanceWE will not PAY for Gas Range WarrantyLength of Warranty WE will PAY for Full ONE-YEAR Warranm
Top Page Image Contents