Roper rud4000 START-UP Guide, Dishwasher Loading, Using Your New Dishwasher, Loading Suggestions

Page 6

START-UP GUIDE

Before using your dishwasher, remove all packaging materials. Read this entire Use and Care Guide. You will find important safety information and useful operating tips.

Using Your New Dishwasher

1.Scrape large food soil and hard items (toothpicks or bones) from dishes.

2.Properly load the dishwasher. (See “Dishwasher Loading.”) Make sure nothing prevents the spray arm(s) from spinning freely.

3.Add detergent and check the rinse aid dispenser. Add rinse aid if needed. (See “Dishwasher Use.”)

4.Push door firmly closed. The door latches automatically. Run hot water at the sink nearest your dishwasher until the water is hot. (See “Dishwasher Efficiency Tips.”) Turn off water.

5.Select the desired cycle. (See “Dishwasher Use.”)

6.Select the desired option. (See “Option Selections.”)

OR

Stopping Your Dishwasher

You can stop your dishwasher anytime during a cycle.

1.Open the door slightly.

2.Wait for the spraying action to stop. Then open the door all the way, if needed.

3.Close the door to continue the cycle.

OR

1.Turn the cycle control knob slowly clockwise until you hear water draining. Let the dishwasher drain completely.

2.Open the door.

3.Turn the cycle control knob to Off.

DISHWASHER LOADING

Loading Suggestions

Remove leftover food, bones, toothpicks and other hard items from the dishes. It is not necessary to rinse the dishes before putting them into the dishwasher.

NOTE: If hard items such as fruit seeds, nuts, and egg shells enter the wash system, you might hear chopping, grinding, crunching, or buzzing sounds. These sounds are normal. Do not let metallic items (such as pot handle screws) get into the wash system. Damage can occur.

Load dishes so soiled surfaces face the spray (down or inward). It is important for the water spray to reach all soiled surfaces.

Load dishes so they are not stacked or overlapping if possible. For best drying, water must be able to drain from all surfaces.

Make sure pot lids and handles, pizza pans, cookie sheets, etc., do not interfere with the spray arm rotation.

Run a rinse cycle (on some models) to keep dishes moist if you do not plan to wash them soon. Foods such as eggs, rice, pasta, spinach, and cooked cereals may be hard to remove if they are left to dry over a period of time.

Quiet operating tips

To avoid thumping/clattering noises during operation:

Make sure lightweight load items are secured in the racks.

Make sure pot lids and handles, pizza pans, cookie sheets, etc., do not touch interior walls or interfere with the rotation of the spray arm.

Load dishes so they do not touch one another.

NOTE: For built-in models, keep sink drain plugs closed during dishwasher operation to prevent noise transfer through drains.

6

Image 6
Contents Use & Care Guide Undercounter DishwasherLAVE-VAISSELLE Encastré Guide d’utilisation Et d’entretienTable DES Matières Dishwasher Safety Your safety and the safety of others are very importantBefore Using Your Dishwasher Parts and Features Top rack Heating elementDishwasher Loading Using Your New DishwasherSTART-UP Guide Stopping Your DishwasherLoading Top Rack Loading Bottom RackDetergent Dispenser Dishwasher USELoading Silverware Basket Filling the dispenserWater Hardness Amount of Detergent Where to fillRinse Aid Dispenser Checking the dispenserCycle Selection Charts To check water temperatureDishwasher Efficiency Tips Adding Items During a Cycle Canceling a CycleChanging a Cycle or Setting Option SelectionsCleaning the interior CleaningCleaning the exterior Dishwasher CareDrain Air Gap TroubleshootingCleaning the Filter Screen StoringDishes are not completely clean Spots and stains on dishesDishes do not dry completely U.S.A CanadaRoper Dishwasher Warranty Whirlpool Corporation will not pay forLA Sécurité DU LAVE-VAISSELLE Votre sécurité et celle des autres est très importanteAvant d’utiliser le lave-vaisselle Pour un lave-vaisselle branché en permanencePièces ET Caractéristiques Utilisation de votre nouveau Lave-vaisselle Guide DE Mise EN MarcheChargement DU LAVE-VAISSELLE Arrêt du lave-vaisselleChargement du panier supérieur Chargement du panier inférieurConseils de fonctionnement silencieux Distributeur de détergent Utilisation DU LAVE-VAISSELLEChargement du panier à couverts Remplissage du distributeurDureté de l’eau Quantité de détergent Distributeur d’agent de rinçageOù remplir Vérification du distributeurConseils d’efficacité pour Le lave-vaisselle Tableaux de sélection De programmesContrôle de la température de l’eau Annulation d’un programme Addition de vaisselle durant Un programmeSélection d’options Changement d’un programme Ou réglageDispositif de protection contre le débordement Lavage D’ARTICLES SpéciauxSystème de séchage Plate Warmer/Chauffe-plat sur certains modèlesNettoyage de l’écran du filtre Entretien DU LAVE-VAISSELLENettoyage Nettoyage de l’extérieurDépannage Dispositif anti-refoulementRemisage Vaisselle pas complètement nettoyée Présence de taches sur la vaisselleVaisselle endommagée au cours d’un programme Pour le serviceVaisselle pas complètement sèche BruitsGarantie DU LAVE-VAISSELLE Roper Whirlpool Corporation ne paiera pas pour3381204 Whirlpool Corporation All rights reserved

rud4000 specifications

The Roper RUD4000 is an advanced piece of equipment designed to enhance efficiency and versatility in various industrial applications. It stands out in the market due to its exceptional features, cutting-edge technologies, and robust characteristics that cater to the demands of modern operations.

One of the key features of the RUD4000 is its powerful performance capability, driven by a high-performance engine that ensures optimum output even under heavy loads. With a commendable power-to-weight ratio, the RUD4000 excels in offering both efficiency and maneuverability, making it suitable for a wide range of tasks. Its ergonomic design allows for easy handling and operation, ensuring that operators can work comfortably over extended periods.

The RUD4000 integrates advanced technology for enhanced control and precision. The intuitive touchscreen interface allows users to customize settings and monitor performance metrics in real-time. This feature not only improves operational efficiency but also helps in identifying any potential issues before they escalate. The machine is equipped with state-of-the-art sensors that continuously assess performance and provide feedback to the operator, ensuring optimal functionality.

Safety is a top priority with the RUD4000. It is designed with multiple safety features, including automatic shut-off mechanisms and advanced braking systems. These features help prevent accidents and ensure a secure working environment, which is critical in industrial settings.

In terms of durability, the RUD4000 is constructed with high-quality materials that withstand harsh conditions. Its rugged build makes it resistant to wear and tear, reducing maintenance needs and operational downtime. This robustness is complemented by an efficient cooling system that prevents overheating, ensuring prolonged performance even during demanding tasks.

Moreover, the RUD4000 offers versatility with its ability to adapt to various attachments and tools, enabling it to tackle a diverse range of applications from material handling to construction projects. This adaptability enhances its value as a multifunctional equipment choice for businesses seeking to optimize their operations.

In summary, the Roper RUD4000 is a highly efficient, technologically advanced, and durable machinery option that addresses the needs of various industries. With its powerful performance, user-friendly interface, safety features, and versatility, it stands as a reliable choice for companies aiming to boost productivity and maintain high operational standards.