Roper rud4000 manual Rinse Aid Dispenser, Where to fill, Water Hardness Amount of Detergent

Page 9

Where to fill

Top of 3rd step (3 tbs or 45 g)

Top of 2nd step (2 tbs or 30 g)

 

Top of 1st step (1 tb or 15 g)

Water Hardness

Amount of Detergent

Rinse Aid Dispenser

Rinse aids prevent water from forming droplets that can dry as spots or streaks. They also improve drying by allowing water to drain off of the dishes during the final rinse by releasing a small amount of the rinse aid into the rinse water. Your dishwasher is designed to use a liquid rinse aid. Do not use a solid or bar-type.

Checking the dispenser

Check the center of the Fill Indicator cap. Clear means it needs filling.

OR

Or you can remove the Fill Indicator cap. If an “E” is visible, the dispenser is empty.

Soft to Medium Hard Water

0 to 6 grains per gallon

For normally soiled loads

Fill the Main Wash section to the top of the 2nd step (2 tbs or 30 g)

Fill the Pre-Wash section to the top of the 2nd step (2 tbs or 30 g) if needed

NOTE: Add only 1 tb or 15 g of detergent to both sections if dishes are pre-rinsed or the water is very soft (0 to 2 grains per gallon).

For heavily soiled loads

Fill the Main Wash section to the top of the 3rd step (3 tbs or 45 g)

Fill the Pre-Wash section to the top of the 2nd step (2 tbs or 30 g)

Filling the dispenser

The rinse aid dispenser holds 6 oz (175 mL) of rinse aid. Under normal conditions, this will last for about three months. You do not have to wait until the dispenser is empty to refill it. Try to keep it full, but be careful not to overfill it.

1.Make sure the dishwasher door is completely open.

2.Remove the Fill Indicator cap.

3.Add rinse aid. Fill to the smallest opening in the lower part of the dispenser. Overfilling can cause the rinse aid to leak out, and could cause oversudsing.

Medium to Hard

For normally soiled and

Water

heavily soiled loads

7 to 12 grains per

Fill the Main Wash section to the

gallon

top of the 3rd step (3 tbs or 45 g)

 

Fill the Pre-Wash section to the

 

top of the 2nd step (2 tbs or 30 g)

 

if needed

NOTE: Fill amounts shown are for standard powdered detergent. Amounts may vary if you use liquid or concentrated powdered detergent. Follow instructions on the package when using liquid dishwasher detergent or concentrated powdered detergent.

4.Clean up any spilled rinse aid with a damp cloth.

5.Replace the Fill Indicator cap. Close tightly.

9

Image 9
Contents LAVE-VAISSELLE Encastré Undercounter DishwasherUse & Care Guide Guide d’utilisation Et d’entretienTable DES Matières Your safety and the safety of others are very important Dishwasher SafetyBefore Using Your Dishwasher Top rack Heating element Parts and FeaturesSTART-UP Guide Using Your New DishwasherDishwasher Loading Stopping Your DishwasherLoading Bottom Rack Loading Top RackLoading Silverware Basket Dishwasher USEDetergent Dispenser Filling the dispenserRinse Aid Dispenser Where to fillWater Hardness Amount of Detergent Checking the dispenserCycle Selection Charts To check water temperatureDishwasher Efficiency Tips Changing a Cycle or Setting Canceling a CycleAdding Items During a Cycle Option SelectionsCleaning the exterior CleaningCleaning the interior Dishwasher CareCleaning the Filter Screen TroubleshootingDrain Air Gap StoringDishes are not completely clean Spots and stains on dishesDishes do not dry completely Canada U.S.AWhirlpool Corporation will not pay for Roper Dishwasher WarrantyVotre sécurité et celle des autres est très importante LA Sécurité DU LAVE-VAISSELLEPour un lave-vaisselle branché en permanence Avant d’utiliser le lave-vaissellePièces ET Caractéristiques Chargement DU LAVE-VAISSELLE Guide DE Mise EN MarcheUtilisation de votre nouveau Lave-vaisselle Arrêt du lave-vaisselleChargement du panier supérieur Chargement du panier inférieurConseils de fonctionnement silencieux Chargement du panier à couverts Utilisation DU LAVE-VAISSELLEDistributeur de détergent Remplissage du distributeurOù remplir Distributeur d’agent de rinçageDureté de l’eau Quantité de détergent Vérification du distributeurConseils d’efficacité pour Le lave-vaisselle Tableaux de sélection De programmesContrôle de la température de l’eau Sélection d’options Addition de vaisselle durant Un programmeAnnulation d’un programme Changement d’un programme Ou réglageSystème de séchage Lavage D’ARTICLES SpéciauxDispositif de protection contre le débordement Plate Warmer/Chauffe-plat sur certains modèlesNettoyage Entretien DU LAVE-VAISSELLENettoyage de l’écran du filtre Nettoyage de l’extérieurDépannage Dispositif anti-refoulementRemisage Présence de taches sur la vaisselle Vaisselle pas complètement nettoyéeVaisselle pas complètement sèche Pour le serviceVaisselle endommagée au cours d’un programme BruitsWhirlpool Corporation ne paiera pas pour Garantie DU LAVE-VAISSELLE RoperWhirlpool Corporation All rights reserved 3381204

rud4000 specifications

The Roper RUD4000 is an advanced piece of equipment designed to enhance efficiency and versatility in various industrial applications. It stands out in the market due to its exceptional features, cutting-edge technologies, and robust characteristics that cater to the demands of modern operations.

One of the key features of the RUD4000 is its powerful performance capability, driven by a high-performance engine that ensures optimum output even under heavy loads. With a commendable power-to-weight ratio, the RUD4000 excels in offering both efficiency and maneuverability, making it suitable for a wide range of tasks. Its ergonomic design allows for easy handling and operation, ensuring that operators can work comfortably over extended periods.

The RUD4000 integrates advanced technology for enhanced control and precision. The intuitive touchscreen interface allows users to customize settings and monitor performance metrics in real-time. This feature not only improves operational efficiency but also helps in identifying any potential issues before they escalate. The machine is equipped with state-of-the-art sensors that continuously assess performance and provide feedback to the operator, ensuring optimal functionality.

Safety is a top priority with the RUD4000. It is designed with multiple safety features, including automatic shut-off mechanisms and advanced braking systems. These features help prevent accidents and ensure a secure working environment, which is critical in industrial settings.

In terms of durability, the RUD4000 is constructed with high-quality materials that withstand harsh conditions. Its rugged build makes it resistant to wear and tear, reducing maintenance needs and operational downtime. This robustness is complemented by an efficient cooling system that prevents overheating, ensuring prolonged performance even during demanding tasks.

Moreover, the RUD4000 offers versatility with its ability to adapt to various attachments and tools, enabling it to tackle a diverse range of applications from material handling to construction projects. This adaptability enhances its value as a multifunctional equipment choice for businesses seeking to optimize their operations.

In summary, the Roper RUD4000 is a highly efficient, technologically advanced, and durable machinery option that addresses the needs of various industries. With its powerful performance, user-friendly interface, safety features, and versatility, it stands as a reliable choice for companies aiming to boost productivity and maintain high operational standards.