
REFRIGERATOR INSTALLATION
HOW TO REMOVE AND INSTALL THE
PULLOUT DRAWER
IMPORTANT: To avoid possible injury, product or property damage, you will need two people to perform the following instructions.
1. Removing Pullout Drawer
•Pull the drawer open to full lower extension. Remove the lower basket (1) by lifting basket from rail system.
•With both hands, hold both sides of the door and pull it up to separate it from the rails.
1
•Press both hangers with yours thumbs to lift it up.
•Separate the left and right rail cover
• With both hands, hold the center of the bar and push it in to let both rails fitted simultaneously.
•Remove the screws(2) of the rail on both sides.
2
CAUTION: When you remove the drawer, do not hold handle. If it comes off, it could cause personal injury.
CAUTION: When laying down the drawer, be careful not to damage the floor or hurt your feet by the sharp edges on hinge side.
12