Changing the network address
When connecting several appliances via the RS485 interface, each appliance must have its own network address.
Press 
for 5 seconds. Display = 
Display = 
Display = 
Display = 
Display = 
Use buttons 
or 
to change the network address (
- 
).
Display = 
Press 
for 5 seconds.
The electronic control system will automatically switch back to normal operating mode.
Resetting the parameters to factory settings
The alarm limits and sensor calibration values can be reset to the factory settings using this function.
Pull out the mains plug.
Keep 
pressed and connect the mains plug.
Display = 
Display = 
The electronic control system will automatically switch back to normal operating mode.
GB
Setting the real time clock
The real time clock is preset (CET). Other time zones or summer/ winter time must be adjusted manually.
Press 
for 5 seconds. Display = 
Display = 
Display = | Year 2012 |
Display = 
Settheyearbypressingthe
buttons.
| = save new setting |
| |
| Display = | Month |
|
| Display = | Set the month by pressing the |
|
|
| buttons. |
|
| = save new setting |
| |
| Display = | Day |
|
| Display = | Set the day by pressing the | buttons. |
| = save new setting |
| |
| Display = | Days of the week (1 = Monday, 7 = | |
|
| Sunday) |
|
| Display = | Set the day of the week by pressing the | |
|
| buttons. |
|
| = save new setting |
| |
| Display = | Hour |
|
| Display = | Set the hour by pressing the |
|
|
| buttons. |
|
| = save new setting |
| |
| Display = | Minute |
|
| Display = | Set the minutes by pressing the |
|
|
| buttons. |
|
| = save new setting |
| |
Press | for 5 seconds. |
| |
The electronic control system will automatically switch back to normal operating mode.
Note
When 
appears in the display, the real time clock must be reset.
21