Cooling
The grid shelves can be moved to accommodate different height bottles or packages.
The ventilation slots of the recirculating fan on the inside must not be covered!
Safety lock
The lock in the appliance door is equipped with a safety mechanism.
Locking the appliance:
• Insert the key as shown by arrow 1.
• Turn the key 90°.
To unlock the appliance, the same procedure must be repeated in the same order.
Defrosting
The appliance defrosts automatically. The water that forms on the rear wall drains into a reservoir at the back of the appliance and evaporates automatically through the compressor heat.
Setting the display indication for the defrost phase
The following indications can be set for the defrost phase.
•Symbol 
+ alternating display of 
and the current tem- perature in the interior of the appliance.
•Symbol 
+ temperature before the start of the defrost phase (factory setting).
•Symbol 
+ 
.
Interior light in appliances with glass door
The interior light is fitted on the inside at the top. Switch on switch S, the interior light comes on.
Changing the tube:
Pull out the mains plug or remove/
unscrew the fuse.
• Lever out the cover panel ➀ on the lamp housing at the front and remove downwards.
• Turn the tube ➁ 90° and pull out downwards.Insert a new tube and turn 90°.
• Replace the cover panel ➀ by inserting at the back and clicking into place at the front.
If the interior light still does not work after you have changed the bulb, please consult your nearest customer service point.
Change the display during the defrost phase
Press 
for 5 seconds. Display = 
Display = 
Display = 
Display = 
Display = 
Display = 
Use buttons 
and 
to select the desired setting.
= alternating display of 
and the current temperature in the interior of the appliance.
= temperature before the start of the defrost phase.
= display of 
only.
Display = 
Press 
for 5 seconds.
The electronic control system will automatically switch back to normal operating mode.
22